45acp bullseye loads used by military teams

Just as the title states. I am curious what 45acp bullseye loads and components are used by our military teams.
Thanks in advance.
Jim

This article goes back about 20 years on the USMC 45 match load-


USMC Match .45 Load | An NRA Shooting Sports Journal (ssusa.org)

Shot next to a guy on the UMCR team in October. Per his ammo cases (and going off memory), he was shooting 4.4gr N310 under 185gr Nosler JHPs at 50 and 4.1 or 4.2 under the same at 25. Didn’t see a COAL marked. Starline cases, unknown LP primers (probably Fed or Win).

From my recollection, most of the service teams use 45 ACP loaded with a 185 JHP as loaded by Atlanta Arms, Loader Monkey or other custom loaders.  I know that Loader Monkey loaded a batch for the USAR team a few years ago and they shot like this :

Here a link to the article shanneba mentioned.

https://www.ssusa.org/content/usmc-match-45-load/

Atlanta Elite 185jhp. Nosler/zero style bullet, 800fps 1.2OAL

Over the years, I found the Nosler load to shoot very well from a machine rest at 50 yds., as long as, the pistol was decent. I used 4.5-4.6 grains of Alliant Bullseye. This was an alternate powder suggested by Dave Salyer, who helped develop the "Marine Corps Load". The best machine rest group I saw with this load was by a club member who had a new Rock River wad gun. The ten shot group was under an inch!

The last few times I've shot with the AMU they've been shooting Atlanta Arms 185JHP. 45acp is easy to load for, lead loads are cheaper and a bit less snappy, unless you're consistently breaking 2600 I'd just stick with lead.

My father was a NM pistol shooter, his favorite load was 185 swc 5 grns 700x