NEED HELP IN RELOADING LOADS FOR A 38 SUPER, LES BEAR
3 posters
Page 1 of 1
NEED HELP IN RELOADING LOADS FOR A 38 SUPER, LES BEAR
I HAVE A NEW LES BAER 38 SUPER NEED HELP TO FIND A GOOD LOAD TO SHOOT IN BULLEYE SHOOTING AT 50 FEET!
miguel.medina.98478672- Posts : 33
Join date : 2015-01-20
Re: NEED HELP IN RELOADING LOADS FOR A 38 SUPER, LES BEAR
There are very few "bad" choices you can make for 50'. I would avoid anything made by Berrys or Raineer in a HP. The loads I would choose for 50' (not in any order of preference) would be the Magnus 130gr L-SWC with 4.2 BE or 5.1gr of Power Pistol. You have to order those from Magnus sized to .355. They are listed under 38/357. Another choice would be the Penn 115gr L-SWC loaded with 5.9 gr PP. I only listed lead bullets because they are great for 50', less expensive and a lot of 50' ranges don't allow jacketed bullets.
Len
Len
LenV- Posts : 4769
Join date : 2014-01-24
Age : 74
Location : Oregon
Re: NEED HELP IN RELOADING LOADS FOR A 38 SUPER, LES BEAR
My .38 Supers all prefer 0.356-0.357" jacketed bullets and 0.357-0.358" cast bullets, but guns can be very different.
Best bullet I have found is the Zero 121gn .38 Super JHP for accuracy.
Have never loaded super-soft loads for .38 Super, but 4.7-5.3gn of AA2 works well. Somewhere around 4.3gn of Solo 1000 is worth trying. 3.8-4.2gn of TiteGroup may be good.
Best bullet I have found is the Zero 121gn .38 Super JHP for accuracy.
Have never loaded super-soft loads for .38 Super, but 4.7-5.3gn of AA2 works well. Somewhere around 4.3gn of Solo 1000 is worth trying. 3.8-4.2gn of TiteGroup may be good.
noylj- Posts : 433
Join date : 2012-03-09
Age : 75
Location : SW USA
Similar topics
» Reload for S&W #442 airweight 2-inch
» 10mm FMJ soft point
» Reloading for a 38 Super
» Pet 38 Super loads
» 38 Super Loads
» 10mm FMJ soft point
» Reloading for a 38 Super
» Pet 38 Super loads
» 38 Super Loads
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum