Zero 185 fmj-hp short line WST loads
5 posters
Page 1 of 1
Zero 185 fmj-hp short line WST loads
I'm experimenting with WST powder, having good accuracy at 50 yards with 4.6 wst. Is Anyone shooting WST with the zero 185 fmj-hp all thru a match and do you load them different for 25 yds?
If so please share your load info,
If so please share your load info,
DavidR- Admin
- Posts : 3032
Join date : 2011-06-10
Age : 70
Location : NRA:Expert, Georgia
Re: Zero 185 fmj-hp short line WST loads
In my experience you could type Bullseye right over the top of WST and use them identically. The WST just burns a lot cleaner. Remember you don't get to download the fmj bullets as much as you would a lead bullet. I am out of WST at this time but to answer your question (kinda) I already load my 185gr as low as I feel I want to try and so would not decrease for the short line. I do shoot the 185 lots of times for the entire match.
Len ( I load everything with 4.2 gr)
Len ( I load everything with 4.2 gr)
LenV- Posts : 4769
Join date : 2014-01-24
Age : 74
Location : Oregon
Re: Zero 185 fmj-hp short line WST loads
I know for my EIC gun I run a lighter load of VV310.. 4.1 to be exact..
lots of options BE, v310, 231, red dot, tightgroup. sort of depends on how you like the recoil of different powders..
lots of options BE, v310, 231, red dot, tightgroup. sort of depends on how you like the recoil of different powders..
jglenn21- Posts : 2620
Join date : 2015-04-07
Age : 76
Location : monroe , ga
Re: Zero 185 fmj-hp short line WST loads
I just started experimenting with this myself. 4.5 for long line and 4 for short seems promising. Both at 1.2 col. I'm using WST for .38 and .45 exclusively now.
orpheoet- Posts : 1054
Join date : 2014-07-29
Age : 56
Location : Berea, Oh
Re: Zero 185 fmj-hp short line WST loads
WST was the replacement for Winchester 452AA, I think. I use 4.3 of 452AA with the Nosler 185JHP for service pistol, long line and short line. Works great.
john bickar- Posts : 2280
Join date : 2011-07-09
Age : 100
Location : Menlo Park, CA
Similar topics
» .45 Short line loads
» Long vs short line loads
» Long and short line loads
» 9mm long and short line loads
» Light/Reduced .45 Short Line Loads
» Long vs short line loads
» Long and short line loads
» 9mm long and short line loads
» Light/Reduced .45 Short Line Loads
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum