Model 17 ejection issues
4 posters
Page 1 of 1
Model 17 ejection issues
Hi
I bought this model 41 about six months ago and had all kinds of ejection and extraction problems. Which I have posted about on this sight. I have replaced the extractor, ejector and tried different recoil springs. Made sure nothing is rubbing, basically made the gun spotless and very smooth. Never fixed the problem. Then I started oiling the bullets and the gun worked perfect. Throughout the summer I dropped the oiling and just shot them right out of the box. I shot a case this summer without a hitch. Recently I have noticed some of the holes in the target not so round and a friend suggested the bullets are starting to tumble you need to clean the barrel. Yesterday I cleaned the barrel and it was like turning back the clock. Now I have stovepipes to the left and to the right same as before. Sometimes the shell doesn't come out of the chamber at all sometimes it comes halfway out.
I suspect if I go back to oiling the bullets again I can shoot but that is not a fix. I really think this has something to do with the chamber. Although I have no idea what. Basically if I let the gun get filthy it works like a charm, clean it and you can't shoot it !
Any thoughts on this problem greatly appreciated.
Thanks, Tom
I bought this model 41 about six months ago and had all kinds of ejection and extraction problems. Which I have posted about on this sight. I have replaced the extractor, ejector and tried different recoil springs. Made sure nothing is rubbing, basically made the gun spotless and very smooth. Never fixed the problem. Then I started oiling the bullets and the gun worked perfect. Throughout the summer I dropped the oiling and just shot them right out of the box. I shot a case this summer without a hitch. Recently I have noticed some of the holes in the target not so round and a friend suggested the bullets are starting to tumble you need to clean the barrel. Yesterday I cleaned the barrel and it was like turning back the clock. Now I have stovepipes to the left and to the right same as before. Sometimes the shell doesn't come out of the chamber at all sometimes it comes halfway out.
I suspect if I go back to oiling the bullets again I can shoot but that is not a fix. I really think this has something to do with the chamber. Although I have no idea what. Basically if I let the gun get filthy it works like a charm, clean it and you can't shoot it !
Any thoughts on this problem greatly appreciated.
Thanks, Tom
thessler- Posts : 149
Join date : 2018-05-14
Re: Model 17 ejection issues
What ammo are you using. Mine runs flawlessly on CCI sv. I’ve tried a few others and they don’t work.
Kurt
Kurt
kjanracing- Posts : 410
Join date : 2015-02-17
Location : Arvada, Colorado
Re: Model 17 ejection issues
Yeah, not too often you get ejection issues with a revolver....lyman1903 wrote:model 17 ?
joy2shoot- Posts : 570
Join date : 2014-08-02
Location : North Carolina
Re: Model 17 ejection issues
OK I made a mistake on the model number.
Thanks for the help.
Thanks for the help.
thessler- Posts : 149
Join date : 2018-05-14
Re: Model 17 ejection issues
I think you can change the title by clicking the Edit button in the original post.
joy2shoot- Posts : 570
Join date : 2014-08-02
Location : North Carolina
Similar topics
» ejection issues
» Model 52 Ejection Issue
» Model 52 empty case ejection
» Model 41 Recoil Spring Strength
» Ejection, feeding issue model 41
» Model 52 Ejection Issue
» Model 52 empty case ejection
» Model 41 Recoil Spring Strength
» Ejection, feeding issue model 41
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum