Bullseye-L Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Pardini HP recoil spring weight? Anyone sell extra power springs?

5 posters

Go down

Pardini HP recoil spring weight?  Anyone sell extra power springs? Empty Pardini HP recoil spring weight? Anyone sell extra power springs?

Post by mpolans 11/18/2018, 4:59 am

Anyone know the weight of a stock Pardini HP (.32acp) recoil spring?  Also, does anyone know if anyone makes extra power recoil springs?

I'm considering either buying some or possibly having some made, but I'd need a starting point.

mpolans

Posts : 606
Join date : 2016-05-28

Back to top Go down

Pardini HP recoil spring weight?  Anyone sell extra power springs? Empty Re: Pardini HP recoil spring weight? Anyone sell extra power springs?

Post by gregbenner 11/18/2018, 6:08 am

I’m curious as to why?

gregbenner

Posts : 738
Join date : 2016-10-29
Location : San Diego area

Back to top Go down

Pardini HP recoil spring weight?  Anyone sell extra power springs? Empty Re: Pardini HP recoil spring weight? Anyone sell extra power springs?

Post by mpolans 11/18/2018, 11:08 pm

Seems the Pardini shoots tends to shoot .32acp more accurately with hotter loads (at least with the 60gr XTPs).  Even the Hornady and Fiocchi factory loads using this bullet are pretty hot, so I figured it'd be better to have some stronger recoil springs to help prevent damage to the frame and to keep from getting brass kicked into the next county.

mpolans

Posts : 606
Join date : 2016-05-28

Back to top Go down

Pardini HP recoil spring weight?  Anyone sell extra power springs? Empty Re: Pardini HP recoil spring weight? Anyone sell extra power springs?

Post by joy2shoot 11/18/2018, 11:31 pm

When shooting my reloads using the Hornady 60 XTP (using the same powder and charge weight that carykiteboarder has published several times), I would classify the recoil as mild on a bad day.  As far as kicking brass into the next county, I am lucky if it gets kicked into the brass catcher.

joy2shoot

Posts : 570
Join date : 2014-08-02
Location : North Carolina

Back to top Go down

Pardini HP recoil spring weight?  Anyone sell extra power springs? Empty Re: Pardini HP recoil spring weight? Anyone sell extra power springs?

Post by mpolans 11/19/2018, 2:41 am

joy2shoot wrote:When shooting my reloads using the Hornady 60 XTP (using the same powder and charge weight that carykiteboarder has published several times), I would classify the recoil as mild on a bad day.  As far as kicking brass into the next county, I am lucky if it gets kicked into the brass catcher.
Right now, I've got a ton of factory ammo and I don't have the luxury of reloading.  Besides, I like the idea of having the ability to swap recoil springs as appropriate for the load.

Regardless, anyone know the strength of the stock one?  I'm guessing no one makes alternative ones right now, so I'll probably be having some custom ones made.

mpolans

Posts : 606
Join date : 2016-05-28

Back to top Go down

Pardini HP recoil spring weight?  Anyone sell extra power springs? Empty Re: Pardini HP recoil spring weight? Anyone sell extra power springs?

Post by Dr.Don 11/19/2018, 2:54 pm

A new-in-package HP spring is 120mm long.
Dr.Don
Dr.Don

Posts : 816
Join date : 2012-11-01
Location : Cedar Park, TX

Back to top Go down

Pardini HP recoil spring weight?  Anyone sell extra power springs? Empty Re: Pardini HP recoil spring weight? Anyone sell extra power springs?

Post by bdas 11/19/2018, 9:53 pm

Where can you have a handful (i.e. less than hundreds) of custom springs made for a reasonable price?

Dave

bdas

Posts : 228
Join date : 2015-11-23
Location : People's Republic of NJ

http://guns.dsttr.com/

Back to top Go down

Pardini HP recoil spring weight?  Anyone sell extra power springs? Empty Re: Pardini HP recoil spring weight? Anyone sell extra power springs?

Post by gregbenner 11/20/2018, 1:46 am

mpolans wrote:Seems the Pardini shoots tends to shoot .32acp more accurately with hotter loads (at least with the 60gr XTPs).  Even the Hornady and Fiocchi factory loads using this bullet are pretty hot, so I figured it'd be better to have some stronger recoil springs to help prevent damage to the frame and to keep from getting brass kicked into the next county.
 Have there been reported issues of problems? As sensitive as my Pardini is to the magazine springs ( 32l v. 32acp v. 22) I would worry about changing recoil springs, unless there is an issue with factory loads.

gregbenner

Posts : 738
Join date : 2016-10-29
Location : San Diego area

Back to top Go down

Pardini HP recoil spring weight?  Anyone sell extra power springs? Empty Re: Pardini HP recoil spring weight? Anyone sell extra power springs?

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum