Stock 9MM RO Load Q's
+4
Wobbley
Bigtrout
james r chapman
blindshooter
8 posters
Page 1 of 1
Stock 9MM RO Load Q's
I have a stock SA RO in 9MM, so far I've tried 125gr HAP over HP 38 with so so results and some plated 147 RN again over HP38 with same results. I did like the felt recoil of the 147 load over the 125's. Both loads were fairly mild. I read that the 9MM does better at higher velocity? Is this true with the stock RO barrel? Anybody have pet loads for the stock RO barrel? My attempts at using the search function here have failed miserably.
TIA for any help.
TIA for any help.
blindshooter- Posts : 119
Join date : 2016-03-15
Re: Stock 9MM RO Load Q's
Just type in loads
james r chapman- Admin
- Posts : 6359
Join date : 2012-01-31
Age : 75
Location : HELL, Michigan
Re: Stock 9MM RO Load Q's
115 HAP over 5.6 gr CFE Pistol, 1.120 COL. for 25 yd. 50 yd. is a very different animal for a stock RO.
Bigtrout- Posts : 417
Join date : 2015-06-21
Age : 84
Location : Richmond, VT
Re: Stock 9MM RO Load Q's
Duh, thanks James
It appears I need to find a slower powder.
It appears I need to find a slower powder.
blindshooter- Posts : 119
Join date : 2016-03-15
Re: Stock 9MM RO Load Q's
James: Do you find CFEPistol particularly dirty? My combat pistol training round is a 115 plated RN behind 5.2 CFEPistol. After a 400+ round session, my pistol looks like it lives in the bottom of a coal mine. After 1000 rounds I start looking like I live in the same mine. It shoots fine, just sooty.
Wobbley- Admin
- Posts : 4776
Join date : 2015-02-12
Re: Stock 9MM RO Load Q's
I have yet to hear of a RO-9 that shoots.
Mine looked good, slide was tight, bushing ok, shot like shit.
Leade was so long, l could load 148 hbwc in it. Maybe thats their problem?
Nothing made it happy. Rebarreled with a KKM 1:32. It shoots now
Mine looked good, slide was tight, bushing ok, shot like shit.
Leade was so long, l could load 148 hbwc in it. Maybe thats their problem?
Nothing made it happy. Rebarreled with a KKM 1:32. It shoots now
Re: Stock 9MM RO Load Q's
Couldn't get mine to shoot either, had it rebarreled to .38 Super...
Sc0- Posts : 315
Join date : 2013-12-29
Location : Houston, TX
Re: Stock 9MM RO Load Q's
Anybody tried the Kart xact fit .38 super barrel in the 9MM RO? I have fitted 2 non ramped in .45acp with good results but never tried fitting a ramp.
blindshooter- Posts : 119
Join date : 2016-03-15
Re: Stock 9MM RO Load Q's
bruce martindale wrote:I have yet to hear of a RO-9 that shoots.
Mine looked good, slide was tight, bushing ok, shot like shit.
Leade was so long, l could load 148 hbwc in it. Maybe thats their problem?
Nothing made it happy. Rebarreled with a KKM 1:32. It shoots now
Which barrel is that? Do you have a link? My 9mm RO is OK but well behind my Beretta so I hardly shoot it.
pgg- Posts : 198
Join date : 2015-11-21
Re: Stock 9MM RO Load Q's
Sorry I don't recall what ramp is in it, there are two. Maybe some one else will know before I can look it up.
Re: Stock 9MM RO Load Q's
Wilson/Nowlin
LenV- Posts : 4758
Join date : 2014-01-24
Age : 74
Location : Oregon
Similar topics
» Load question on Penn Bullets for Distinguished load
» Hornady Lock-N-Load AP vs Lee Load Master
» Goodbye Hornady 0.311" 60 Grain XTP
» WST in Stock
» CCI 22 sv in stock
» Hornady Lock-N-Load AP vs Lee Load Master
» Goodbye Hornady 0.311" 60 Grain XTP
» WST in Stock
» CCI 22 sv in stock
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|