Rink Grip on 1911
5 posters
Page 1 of 1
Rink Grip on 1911
Does anyone have any experience with Rink grips installed on a 1911?
Is the grip a one piece or does it come in 2 parts?
If it is one piece how do you install the grip to get past the grip screw bushings which are not flush?
Chris
Is the grip a one piece or does it come in 2 parts?
If it is one piece how do you install the grip to get past the grip screw bushings which are not flush?
Chris
Toz35m- Posts : 264
Join date : 2012-10-17
Location : PDX
Re: Rink Grip on 1911
Hi Chris, I happened to be there when Gregor installed his- the Rink comes apart, then you reassemble the halves on the gun (over the bushings.) As I recall it was a third screw down by the back of the palm shelf that holds the halves together.
-Ben.
-Ben.
bking- Posts : 44
Join date : 2011-09-02
Location : PDX
Re: Rink Grip on 1911
It has two down screws that connect the palm shelf
DavidR- Admin
- Posts : 3032
Join date : 2011-06-10
Age : 70
Location : NRA:Expert, Georgia
Re: Rink Grip on 1911
Yes, it has two down screws that connect the palm shelf, but they are for raising and lowering the shelf to fit your grip. The big bottom side screw and the screw into the grip take it apart and put it on the gun. I believe.
fredw4- Posts : 18
Join date : 2012-11-07
Location : North Carolina
Re: Rink Grip on 1911
Actually Ben's right - four screws that hold the two sides to the bushings of the frame and then one screw that clamps the lower part of the palm shelf. There are no screws underneath as the palm shelf of the 1911 is nonadjustable and it's not an option (or I would have done it). The grip is, to me, a great advantage as I want my 1911 (which isn't made as a target pistol) to feel as much like my Hammerli or my Walther which are both target pistols. I feel I get a very consistent grip with the Rinks and have them on all my guns.
Here's some photos of both sides.
Hope that helps.
Gregor
Here's some photos of both sides.
Hope that helps.
Gregor
Re: Rink Grip on 1911
Yes thats true,I forgot the 1911 rink is different from all their other models in it does not have the adjustable palm shelf
DavidR- Admin
- Posts : 3032
Join date : 2011-06-10
Age : 70
Location : NRA:Expert, Georgia
Similar topics
» Rink Ambidextrous grip, symmetric, 1911 style on a LP50c
» Washers in Rink grip ?
» Looking for Rink like grip for Springfield RO
» Rink grip texture
» Rink 7deg grip feedback?
» Washers in Rink grip ?
» Looking for Rink like grip for Springfield RO
» Rink grip texture
» Rink 7deg grip feedback?
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|