Bullseye-L Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

problems with H S 107

+4
heavyop7
Jack H
BE Mike
jim krouse
8 posters

Go down

problems with H S 107 Empty problems with H S 107

Post by jim krouse Mon May 11, 2020 2:31 pm

When pistol is fired the slide will not come back,some times you can not pull the slide back it feel like its is locked up.
can only get it back by using a small screw driver to start it back. Slide will not come back and lock when the last
shot is fired. And the slide lock lever will not lock the slide back.
Can any one help.
Jim

jim krouse

Posts : 2
Join date : 2020-01-24

Back to top Go down

problems with H S 107 Empty Re: problems with H S 107

Post by BE Mike Mon May 11, 2020 2:38 pm

Sounds like it may be something binding. I would start by giving it a field stripping, clean thoroughly and then start inspecting. Could be that the rails that the slide rides on are cracked or the slide itself. It could also be something as simple as the recoil spring bound up.
BE Mike
BE Mike

Posts : 2564
Join date : 2011-07-29
Location : Indiana

Back to top Go down

problems with H S 107 Empty Re: problems with H S 107

Post by Jack H Mon May 11, 2020 3:08 pm

Any indication of weak ammo?  Did you change ammo recently?  Perhaps a new lot of CCI SV?
Jack H
Jack H

Posts : 2693
Join date : 2011-06-10
Age : 75
Location : Oregon

Back to top Go down

problems with H S 107 Empty Re: problems with H S 107

Post by heavyop7 Mon May 11, 2020 4:44 pm

jim krouse wrote:When pistol is fired the slide will not come back,some times you can not pull the slide back it feel like its is locked up.
can only get it back by using a small screw driver to start it back. Slide will not come back and lock when the last
shot is fired. And the slide lock lever will not lock the slide back.
Can any one help.
Jim
Check for cracked frame above right hand grip 

Tony

heavyop7

Posts : 25
Join date : 2015-03-25

Back to top Go down

problems with H S 107 Empty Re: problems with H S 107

Post by SonOfAGun Mon May 11, 2020 5:23 pm

jim krouse wrote:When pistol is fired the slide will not come back,some times you can not pull the slide back it feel like its is locked up.
can only get it back by using a small screw driver to start it back. Slide will not come back and lock when the last
shot is fired. And the slide lock lever will not lock the slide back.
Can any one help.
Jim

Is this pistol new to you? Have you ever seen it work properly?

Are you sure you have the correct magazine for this pistol?

Have you field stripped it? Cleaned it? Done any other diagnostic work?

What are you doing with the "small screw driver to start" moving the slide back?

Do you have any detailed photos?

I suggest not firing it any further until you get this sorted out. It may be already damaged, or you may be causing further damage by firing it.
SonOfAGun
SonOfAGun

Posts : 172
Join date : 2017-08-12
Location : Midwest

Back to top Go down

problems with H S 107 Empty Re: problems with H S 107

Post by Spurls Tue May 12, 2020 3:36 pm

I had a similar issue, it ended up being a cracked frame. Check your rails for any signs of stress.

Spurls

Posts : 37
Join date : 2018-02-25
Age : 37
Location : Midland, MI

Back to top Go down

problems with H S 107 Empty Re: problems with H S 107

Post by Aprilian Tue May 12, 2020 3:47 pm

Once you bring the slide back and it cocks the hammer, is it much easier to pull the slide back a second time or is it still giving unusually high resistance?
Aprilian
Aprilian

Posts : 987
Join date : 2016-05-13
Location : Minnesota

Back to top Go down

problems with H S 107 Empty Re: problems with H S 107

Post by jim krouse Tue May 12, 2020 4:37 pm

Today I changed the grip on the right side of the gun from a target grip  that I installed to the orignal flat grip that was on the gun when I got it. The gun worked like a charm . Slide locked back on the last shot .Slide moved as easy as could be. I think the target grips had a high spot or two and they did not keep the slide lock lever in place.
Thanks for all the help

jim krouse

Posts : 2
Join date : 2020-01-24

Back to top Go down

problems with H S 107 Empty Re: problems with H S 107

Post by dronning Tue May 12, 2020 6:06 pm

jim krouse wrote:Today I changed the grip on the right side of the gun from a target grip  that I installed to the orignal flat grip that was on the gun when I got it. The gun worked like a charm . Slide locked back on the last shot .Slide moved as easy as could be. I think the target grips had a high spot or two and they did not keep the slide lock lever in place.
Thanks for all the help
Yep always check the latest this you did even if it runs fine for a while!  Glad you got it running.

- Dave
dronning
dronning

Posts : 2581
Join date : 2013-03-20
Age : 70
Location : Lakeville, MN

Back to top Go down

problems with H S 107 Empty Re: problems with H S 107

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum