32 s&w long wadcutter diameter
3 posters
Page 1 of 1
32 s&w long wadcutter diameter
I recently acquired a walther gsp in 32 swl. What size bullet SHOULD I use? I realize it may not be the right one for my gun, but I'd like to have a starting place.
Thanks in advance.
Thanks in advance.
10sandxs- Posts : 972
Join date : 2016-01-29
Re: 32 s&w long wadcutter diameter
Greetings,
All of the factory Walther GSP-C barrels I have gauged measure 0.3135"-0.3150".
The use of a 0.314" bullet would be a good starting point.
You should actually measure your barrel to be sure.
Cheers,
Dave
All of the factory Walther GSP-C barrels I have gauged measure 0.3135"-0.3150".
The use of a 0.314" bullet would be a good starting point.
You should actually measure your barrel to be sure.
Cheers,
Dave
fc60- Posts : 1458
Join date : 2011-06-11
Location : South Prairie, WA 98385
Re: 32 s&w long wadcutter diameter
Thanks Dave, as the sizing dies are cheap, ill get a .314 and a 315.
Rob
Rob
10sandxs- Posts : 972
Join date : 2016-01-29
Re: 32 s&w long wadcutter diameter
Rob,
Travis has a Walther 32. He’d be a good source for load and bullet info. I have a Benelli. I’ve been casting with an Accurate mold for an 88 gr wadcutter. Drops at .317 with range scrap. I size it to .315. Great shooting bullet (X ring) at 25. I haven’t had good results at 50 since H&N quit importing their great HBWC.
Good luck!
Jim
Travis has a Walther 32. He’d be a good source for load and bullet info. I have a Benelli. I’ve been casting with an Accurate mold for an 88 gr wadcutter. Drops at .317 with range scrap. I size it to .315. Great shooting bullet (X ring) at 25. I haven’t had good results at 50 since H&N quit importing their great HBWC.
Good luck!
Jim
JKR- Posts : 763
Join date : 2015-01-13
Location : Northern Wisconsin
Re: 32 s&w long wadcutter diameter
Yup, he was with me when I bought it (he made me do it! really, he did) he just casts and shoots with tumble lube...JKR wrote:Rob,
Travis has a Walther 32. He’d be a good source for load and bullet info. I have a Benelli. I’ve been casting with an Accurate mold for an 88 gr wadcutter. Drops at .317 with range scrap. I size it to .315. Great shooting bullet (X ring) at 25. I haven’t had good results at 50 since H&N quit importing their great HBWC.
Good luck!
Jim
10sandxs- Posts : 972
Join date : 2016-01-29
Re: 32 s&w long wadcutter diameter
I know. He’s good at that. He let me shoot a match at Oak Dale with his 22. After that, I just had to have a Walther!
Jim
Jim
JKR- Posts : 763
Join date : 2015-01-13
Location : Northern Wisconsin
Similar topics
» 32 S&W Long wadcutter OAL?
» 32 S&W Long Wadcutter Plug
» Fiocchi .32 S&W long wadcutter
» Crimp on .32 S&W Long wadcutter.
» Roll or taper Crimp for 32 long wadcutter?
» 32 S&W Long Wadcutter Plug
» Fiocchi .32 S&W long wadcutter
» Crimp on .32 S&W Long wadcutter.
» Roll or taper Crimp for 32 long wadcutter?
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum