.22 Conversion for Commander
+2
STEVE SAMELAK
NuJudge
6 posters
Page 1 of 1
.22 Conversion for Commander
My father left me several Commanders and Commander-length pistols. Is there a .22 conversion that is at least moderately accurate that will work on them? I have a Nelson and a Steel Marvel, and I don't believe they will work.
NuJudge- Posts : 263
Join date : 2011-09-22
Age : 67
Location : SE Michigan
Re: .22 Conversion for Commander
It would only take a moment to try them.
Pop off a slide and see for your self, I'm fairly sure it would work.
Pop off a slide and see for your self, I'm fairly sure it would work.
STEVE SAMELAK- Posts : 956
Join date : 2011-06-10
Re: .22 Conversion for Commander
Yeah, I'm almost positive they'll work. The conversions "clamp" into place on the slide stop. It might look funny (gap between the dustcover and conversion), but the only reciprocating part of the conversion (slide) rides loosely in the rails pretty far back. Only issue I see is some commanders have heavier mainsprings due to the lighter slides, so you may need to go lighter on the mainspring (not to be confused with recoil spring).
Dave
Dave
Dcforman- Posts : 922
Join date : 2017-11-18
Age : 43
Location : Ohio
Re: .22 Conversion for Commander
Ciener makes conversions for Commander much like Marvel Unit 1/Nelson. Advantage Arms makes unit for Commander much like Marvel Unit 2 for plinkers. May be others.
Olde Pilot- Posts : 315
Join date : 2015-07-27
Location : Apopka Fl (Central Fl)
Re: .22 Conversion for Commander
I used my Nelson on my Kimber pro which is their commander size pistol, no problems at all.
expendable- Posts : 90
Join date : 2011-10-01
Similar topics
» Fusion Custom Pro Commander
» Gold Cup Commander ammo q
» Non-bullseye guns
» marvel conversion vs nelson conversion
» Looking for 22 conversion
» Gold Cup Commander ammo q
» Non-bullseye guns
» marvel conversion vs nelson conversion
» Looking for 22 conversion
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum