Marvel Compensator

Does anyone know of a clamp on compensator with a front sight to fit a new production Marvel? Looking to extend the sight radius, not so concerned about the recoil of the 22...

Dave

Marvel at one point made a "longslide" variant. I do not have one on hand but the long slide rib may fit the standard barrel.

Longslide rail hole pattern is different than 5”.
Jon

Jon Eulette wrote:Longslide rail hole pattern is different than 5”.
Jon

Have a measurement handy?


Top barrel is an older marvel production bottom is new, center hole is tapped. Not 100% sure why the went to the effort to do that, my assumption was that the longslide rail might fit with that position. It is not used with the normal irons rail, the combo rail, or the optic rail.

Barrel protrudes 0.540”. First hole from front of rail is 2.00”. Second hole is 2.50” from the first.
Jon 

Could you fit a "bloop tube" extension on the 5/8 barrel?  Then you could mount a sight where you want

The longslide combo rib will fit the standard barrel.