Weighing trigger
5 posters
Page 1 of 1
Weighing trigger
1: What is a official trigger test weight set (do all weights need to be official NRA) ?
2:Must it have the roller on the bar at the trigger ?
3:Is a curved trigger a pivot trigger ?
Tom
2:Must it have the roller on the bar at the trigger ?
3:Is a curved trigger a pivot trigger ?
Tom
9146gt- Posts : 61
Join date : 2012-03-21
Location : NC
Re: Weighing trigger
you just need to be able to lift a 3.5 lb weight off a surface with its attachment point being the center of the trigger with the gun held so the barrel is straight up and level and the grip safety held in and slide safety in the off position. a NRA approved weight is what it will checked with so having one is nice but weight is weight, as long as it lifts it and doesn't drop the hammer your good to go. just remember that if you just adjusted the spring, that after shooting it will usually lighten up, so most people add a little extra weight when testing a new setup, i go with 3.75lb, and if it just barely holds it then thats where i leave it. This is for a wad gun, ball gun needs to lift 4 lbs, revolver 2lbs. center fire i believe is 2.5.
DavidR- Admin
- Posts : 3032
Join date : 2011-06-10
Age : 70
Location : NRA:Expert, Georgia
Re: Weighing trigger
Any other thoughts on this?
Tom
Tom
9146gt- Posts : 61
Join date : 2012-03-21
Location : NC
Re: Weighing trigger
I'm pretty sure the "offical NRA set" has to be stamped NRA on all weights, and I believe the stick has to be as it came with the kit--so with the roller on the stick. If the roller is removed the entire weight set would be light.
A curved trigger is NOT a pivot trigger. A 1911 is NOT a pivot trigger whereas a Model 14 S&W revolver, and most american .22's are pivot triggers.
A curved trigger is NOT a pivot trigger. A 1911 is NOT a pivot trigger whereas a Model 14 S&W revolver, and most american .22's are pivot triggers.
Rob Kovach- Admin
- Posts : 2692
Join date : 2011-06-13
Age : 51
Location : Brooklyn, WI
Re: Weighing trigger
.22 semi-auto or revolver Not Less Than 2lbs
CF semi-auto or revolver NTL 2 1/2lbs except .45 semi-auto used in CF NLT 3 1/2lbs
.45 semi-auto NTL 3 1/2lbs .45 revolver NTL 2 1/2lbs
CF semi-auto or revolver NTL 2 1/2lbs except .45 semi-auto used in CF NLT 3 1/2lbs
.45 semi-auto NTL 3 1/2lbs .45 revolver NTL 2 1/2lbs
dronning- Posts : 2581
Join date : 2013-03-20
Age : 71
Location : Lakeville, MN
Re: Weighing trigger
There are two types of NRA official weights one with one without the roller. The one with tends to weigh the trigger lighter be cause it centers better. Now witch is correct?
AHI- Posts : 38
Join date : 2012-03-11
Re: Weighing trigger
my weight set WITH the roller doesn't come close to "centered" or "balanced" when the trigger in on the roller, but it does let me pick just the very last point of the weight off the bench. I don't think it makes any difference whether I pick up the weights on the roller, or from the stick so the weight lifts straight up.
Rob Kovach- Admin
- Posts : 2692
Join date : 2011-06-13
Age : 51
Location : Brooklyn, WI
Re: Weighing trigger
That is the question that I should have asked.AHI wrote:There are two types of NRA official weights one with one without the roller. The one with tends to weigh the trigger lighter be cause it centers better. Now witch is correct?
Tom
9146gt- Posts : 61
Join date : 2012-03-21
Location : NC
Similar topics
» Offical procedure for weighing triggers
» Weighing rimfire for function
» Weighing cast bullets??
» Weighing rifle powder
» Opinions wanted
» Weighing rimfire for function
» Weighing cast bullets??
» Weighing rifle powder
» Opinions wanted
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum