Clays Hardball load recipe?
3 posters
Page 1 of 1
Clays Hardball load recipe?
Hi all; Anyone use Clays powder for their hardball loads for EIC? If so, I am looking for a starting point (maybe 4.2 grains?). I use Zero 230's, SL brass and WIN LP. Thanks in advance!
Bullseye58- Posts : 125
Join date : 2012-05-25
Re: Clays Hardball load recipe?
4.2 is what I have always heard. It sounds like you are good to go.
DeweyHales- Posts : 641
Join date : 2011-06-10
Location : North Carolina
Re: Clays Hardball load recipe?
Hello Bullseye58,
One of my favorite loads....
It should clock out at around 760 feet per second.
It is a soft shooting and very accurate load.
Good luck.
Jim
One of my favorite loads....
- Starline or ASYM brass
- Winchester LP primer
- 4.2 grains of CLAYS
- Nosler or Hornady 230 grains hardball
It should clock out at around 760 feet per second.
It is a soft shooting and very accurate load.
Good luck.
Jim
spursnguns- Posts : 611
Join date : 2013-01-04
Age : 66
Location : Nampa, Idaho
Re: Clays Hardball load recipe?
Thanks Jim; do you seat @ approx 1.260?
Bullseye58- Posts : 125
Join date : 2012-05-25
Re: Clays Hardball load recipe?
Hello Bullseye58,
I normally shoot for between 1.265" and 1.270". I find that for hardball loads; consistancy of length is more inportant than the exact dimension.
Jim
I normally shoot for between 1.265" and 1.270". I find that for hardball loads; consistancy of length is more inportant than the exact dimension.
Jim
spursnguns- Posts : 611
Join date : 2013-01-04
Age : 66
Location : Nampa, Idaho
Similar topics
» Using "Clays" powder for .45 Auto Loads
» Kimber 9mm target 2 recipe
» .45 Recipe
» S&W 52 recipe
» 9mm recipe for 1 in 32 twist?
» Kimber 9mm target 2 recipe
» .45 Recipe
» S&W 52 recipe
» 9mm recipe for 1 in 32 twist?
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|