Trigger Upgrade
4 posters
Page 1 of 1
Re: Trigger Upgrade
When you say trigger do you mean the actual part that you put your finger on?
Rob Kovach- Admin
- Posts : 2692
Join date : 2011-06-13
Age : 51
Location : Brooklyn, WI
Re: Trigger Upgrade
Yes, I would like to upgrade my trigger there is a little slop in the factory one.
WVBE Shooter- Posts : 90
Join date : 2012-10-02
Re: Trigger Upgrade
read this
http://www.brownells.com/aspx/learn/learndetail.aspx?lid=10297
or watch this
https://www.youtube.com/watch?v=Fx_4g8MOKHg
there is no such thing as a 100% drop in trigger
http://www.brownells.com/aspx/learn/learndetail.aspx?lid=10297
or watch this
https://www.youtube.com/watch?v=Fx_4g8MOKHg
there is no such thing as a 100% drop in trigger
dronning- Posts : 2581
Join date : 2013-03-20
Age : 70
Location : Lakeville, MN
Re: Trigger Upgrade
I'm still not sure what you are asking for. If you are trying to change what you feel when you pull the trigger, that is going to involve stoning of your hammer hooks or sear, and like dronning said, you just can't buy some parts and expect a miraculous improvement. Stoning the hammer and sear incorrectly can give you an unsafe gun if you do it wrong. If you are just looking for a different one of these parts that's easy:
Rob Kovach- Admin
- Posts : 2692
Join date : 2011-06-13
Age : 51
Location : Brooklyn, WI
Re: Trigger Upgrade
Cylinder and Slide makes "drop in" trigger kits that are supposed to feel good right out of the package, and I'm aware of some kits that were really good and others that have a little roughness in them--but never a kit that was bad enough to get the person to send the kit back or exchange it.
Bullseye pistol smiths exist because of the difficulty in mastering the skill to make a trigger feel just right.
Bullseye pistol smiths exist because of the difficulty in mastering the skill to make a trigger feel just right.
Rob Kovach- Admin
- Posts : 2692
Join date : 2011-06-13
Age : 51
Location : Brooklyn, WI
Re: Trigger Upgrade
there are no drop in triggers, being you have slop, you need to just have a good gunsmith fit a trigger to the gun.
DavidR- Admin
- Posts : 3032
Join date : 2011-06-10
Age : 70
Location : NRA:Expert, Georgia
Similar topics
» Beretta 92A1 Trigger Upgrade
» Pardini threaded trigger stud upgrade
» Lee APP Upgrade
» Thinking about a .22 upgrade
» Upgrade Colt or RO
» Pardini threaded trigger stud upgrade
» Lee APP Upgrade
» Thinking about a .22 upgrade
» Upgrade Colt or RO
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|