Red Dot for match loads?
+2
Rob Kovach
kwixdraw
6 posters
Page 1 of 1
Red Dot for match loads?
Has anyone used Red Dot for wad gun loads?
kwixdraw- Posts : 221
Join date : 2014-09-04
Location : Scott County TN
Re: Red Dot for match loads?
Yes. It is good. Try 4.3-4.5gr
http://www.alliantpowder.com/reloaders/powderlist.aspx?type=1&powderid=4&cartridge=35
http://www.alliantpowder.com/reloaders/powderlist.aspx?type=1&powderid=4&cartridge=35
Rob Kovach- Admin
- Posts : 2692
Join date : 2011-06-14
Age : 51
Location : Brooklyn, WI
Re: Red Dot for match loads?
i loves me some red dot!
i run it LOW
3.2 or 3.4 gr
not saying thats best but it sure is economical
that is IF you can find any on a shelf
im down to about 3oz and am saving it for emergencies
i run it LOW
3.2 or 3.4 gr
not saying thats best but it sure is economical
that is IF you can find any on a shelf
im down to about 3oz and am saving it for emergencies
guncheese- Posts : 75
Join date : 2014-03-19
Location : where they make the cheese
Re: Red Dot for match loads?
guncheese wrote:i loves me some red dot!
i run it LOW
3.2 or 3.4 gr
not saying thats best but it sure is economical
that is IF you can find any on a shelf
im down to about 3oz and am saving it for emergencies
185's or 200's?
jmdavis- Posts : 1409
Join date : 2012-03-24
Location : Virginia
Re: Red Dot for match loads?
200s
but i bet 185s would be fine
just have to mess with it
quickload says with 1.250" using the 200gr
3.2gr gives you 719fps and 3.4 gives 749fps
perfect!!!
i just got a chono yesterday
and i will be testing all the loads ive messed with
so stay tuned
but i bet 185s would be fine
just have to mess with it
quickload says with 1.250" using the 200gr
3.2gr gives you 719fps and 3.4 gives 749fps
perfect!!!
i just got a chono yesterday
and i will be testing all the loads ive messed with
so stay tuned
guncheese- Posts : 75
Join date : 2014-03-19
Location : where they make the cheese
Re: Red Dot for match loads?
No, I haven't used it but if it shows up when I run out of 700-X and nothing else is available, I would not hesitate to use it.
GrumpyOldMan- Posts : 482
Join date : 2013-03-08
Location : High Desert Southwest Red Rock Country
Re: Red Dot for match loads?
I've been using red dot fir several years. I only use it indoors, no particular reason, just cuz. I run about 4.2 gr under 185gr heads. Shoots really nice and soft, seems very accurate. I acquired a 12lb keg from a retired shotgunner some years back for like $50. Ah, those were the days...
SSgtG- Posts : 63
Join date : 2012-05-18
Location : Iowa
Similar topics
» distinguished revolver loads in harry reeves match
» Replicating Atlanta Arms 9mm Elite 115gr JHP Match loads
» Pet Loads of Top Shooters & Loads from the past.
» "pet loads" "classic loads"
» 9mm recipe for 1 in 32 twist?
» Replicating Atlanta Arms 9mm Elite 115gr JHP Match loads
» Pet Loads of Top Shooters & Loads from the past.
» "pet loads" "classic loads"
» 9mm recipe for 1 in 32 twist?
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum