harrison design triggers
+5
Dr.Don
Dipnet
rich.tullo
Sc0
SW-52
9 posters
Page 1 of 1
harrison design triggers
in the past week i order in brownells a medium greider trigger and after see a custom gun with Harrison design trigger, i order a short trigger direct to harrison webpage. had trouble with my shipping address and mr john contact me for i help to he ship my trigger. the service is excellent and the amability is awesome,highly recommended. The secret of Prosperity,is the amability-cjm
SW-52- Posts : 803
Join date : 2015-07-20
Age : 40
Re: harrison design triggers
I replaced a few parts on my RO and a Taurus PT1911 to the Harrison forged steel parts, some small fitting required but the parts are excellent quality.
Sc0- Posts : 315
Join date : 2013-12-29
Location : Houston, TX
Re: harrison design triggers
They are the best and the trigger is great and eliminates the problem of a shifting over travel nut.
rich.tullo- Posts : 1999
Join date : 2015-03-27
Harrison thumb safeties?
Has anybody ever installed a Harrison thumb safety on their 1911? I like its design, especially the lower thumb 'shelf,' but was wondering if extensive filing was needed? Thanks, dipnet
Dipnet- Posts : 186
Join date : 2014-06-09
Location : Gainesville, Florida
Re: harrison design triggers
Thumb safeties always have to be fitted. They are oversize so they can be made to fit any gun.
Dr.Don- Posts : 816
Join date : 2012-10-31
Location : Cedar Park, TX
Re: harrison design triggers
Dipnet: replaced 3 safeties on my bullseye pistols with the one you mentioned. All required a bit of work in filing and then stoning to fit, found plenty of information on fitting of safeties with pictures on Google so fitted all 3 without any major issues or ruining of parts. The lower shelf and being a forged part appealed to me as well.
Sc0- Posts : 315
Join date : 2013-12-29
Location : Houston, TX
Re: harrison design triggers
What's a Harrison trigger?
Jack H- Posts : 2693
Join date : 2011-06-10
Age : 75
Location : Oregon
Re: harrison design triggers
John Harrison is a custom gunsmith with his own line of 1911 products. Quality is about the same as all others; 80 +% of all 1911 parts made by same manufacturer with different labels.
Jon
Jon
Jon Eulette- Posts : 4399
Join date : 2013-04-15
Location : Southern Kalifornia
Re: harrison design triggers
this is harrison triggersJack H wrote:What's a Harrison trigger?
https://shop.harrisoncustom.com/triggers-for-1911s
SW-52- Posts : 803
Join date : 2015-07-20
Age : 40
Re: harrison design triggers
thanks for the info jon.Jon Eulette wrote:John Harrison is a custom gunsmith with his own line of 1911 products. Quality is about the same as all others; 80 +% of all 1911 parts made by same manufacturer with different labels.
Jon
SW-52- Posts : 803
Join date : 2015-07-20
Age : 40
Re: harrison design triggers
So Jon, who is that manufacturer?
igolfat8- Posts : 163
Join date : 2013-04-06
Re: harrison design triggers
So Harrison is just another brand name of the same old same old??
The original reference to "design" could be misleading.
The original reference to "design" could be misleading.
Jack H- Posts : 2693
Join date : 2011-06-10
Age : 75
Location : Oregon
Re: harrison design triggers
The overtravel screw is set in the back of the trigger and it has a smooth trigger surface(where your finger goes) the one I had installed was filed to fit.
Chris Miceli- Posts : 2715
Join date : 2015-10-27
Location : Northern Virginia
Similar topics
» Design a 41 rear end for me
» Shooting Box Design
» New MCP Beretta 92 design
» DICK HORTON MATCH GRIPS - NEW E-MAIL ADDRESS
» Similar design to Pardini SP in .45?
» Shooting Box Design
» New MCP Beretta 92 design
» DICK HORTON MATCH GRIPS - NEW E-MAIL ADDRESS
» Similar design to Pardini SP in .45?
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|