9mm Lead Loads
4 posters
Page 1 of 1
9mm Lead Loads
Any good 9mm loads using a lead bullet? If so please provide specs. Thank you.
Tim:H11- Posts : 2133
Join date : 2015-11-04
Age : 36
Location : Midland, GA
Re: 9mm Lead Loads
This is a softball short line load I use, but my barrel is 10" twist and designed to mimic the 38 Spec wadcutter ballistics. I don't know how it would do in a 16 twist barrel; probably not very well. It is Magnus 147gr #403 over 2.4gr Bullseye. I use an 8 lb recoil spring and a frame mounted dot to get good functional reliability. For 50 yds I step up to the Hornady 147gr XTP.
Dr.Don- Posts : 816
Join date : 2012-10-31
Location : Cedar Park, TX
Re: 9mm Lead Loads
A 38 super is probably a better CF gun. No data to back it up
Chris Miceli- Posts : 2715
Join date : 2015-10-27
Location : Northern Virginia
Re: 9mm Lead Loads
I think you're right Chris.. at least the ones I've built have been very good and not hard to get really good soft loads once you mess with the first one.
plenty of very accurate soft loads posted here if you search.
we're found the Dardus 126 gr lead SWC to be an excellent round when loaded with 3.6-3.8 of BE. slide mounted optics. Lots of folks like the 147 Magnus over 3.0 of BE
the 38 super is... super(sorry)
plenty of very accurate soft loads posted here if you search.
we're found the Dardus 126 gr lead SWC to be an excellent round when loaded with 3.6-3.8 of BE. slide mounted optics. Lots of folks like the 147 Magnus over 3.0 of BE
the 38 super is... super(sorry)
jglenn21- Posts : 2620
Join date : 2015-04-07
Age : 76
Location : monroe , ga
Similar topics
» Lead Loads for GT45?
» Lead loads for Metallic
» Powder puff 9mm LEAD loads?
» 38 Special Factory 158gr Lead Semi-Wadcutter or Lead Round Nose For Distinguished Revolver
» Pet Loads of Top Shooters & Loads from the past.
» Lead loads for Metallic
» Powder puff 9mm LEAD loads?
» 38 Special Factory 158gr Lead Semi-Wadcutter or Lead Round Nose For Distinguished Revolver
» Pet Loads of Top Shooters & Loads from the past.
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum