epoxy bed 22 upper?
5 posters
Page 1 of 1
epoxy bed 22 upper?
My advantage arms target upper will shoot itself loose despite my attention, judicious torque and blue locktite.
Am I off my rocker to think about putting some acraglass jel in behind the slide stop and in front of the feed ramp?
In theory this would eat some of the forces that usually ride on the take-down/guide-rod screw and eventually shake things loose. I'll have to look and see if this would make a mechanical lock. Has anyone else done this?
Am I off my rocker to think about putting some acraglass jel in behind the slide stop and in front of the feed ramp?
In theory this would eat some of the forces that usually ride on the take-down/guide-rod screw and eventually shake things loose. I'll have to look and see if this would make a mechanical lock. Has anyone else done this?
Merick- Posts : 452
Join date : 2015-08-13
Location : Kansas
Re: epoxy bed 22 upper?
When a bolt gets over tightened the threads are deformed ever so slightly and it looses it ability to hold tight. Try a new guide rod, hopefully the internal threads aren't damaged on link area of the barrel.
- Dave
- Dave
dronning- Posts : 2581
Join date : 2013-03-20
Age : 70
Location : Lakeville, MN
Re: epoxy bed 22 upper?
You mean the long end is not where you put the breaker bar???
james r chapman- Admin
- Posts : 6359
Join date : 2012-01-31
Age : 75
Location : HELL, Michigan
Re: epoxy bed 22 upper?
james r chapman wrote:You mean the long end is not where you put the breaker bar???
Breaker bar has to be the long end or else there isn't room for the cheater bar.
Merick- Posts : 452
Join date : 2015-08-13
Location : Kansas
Re: epoxy bed 22 upper?
I have had no problems when I shape the rod end slightly and evenly convex, and taper the threads away from any mushing.
Jack H- Posts : 2693
Join date : 2011-06-10
Age : 75
Location : Oregon
Re: epoxy bed 22 upper?
new slide stop pin and guide rod ?
Chris Miceli- Posts : 2715
Join date : 2015-10-27
Location : Northern Virginia
Re: epoxy bed 22 upper?
It came with a new slide stop pin and guide rod, Im not buying replacements every 1000 rounds.Chris Miceli wrote:new slide stop pin and guide rod ?
I think the stop pin is hardened, anyhow there isn't a mark on it, and a new one isn't going to fit any different.
Merick- Posts : 452
Join date : 2015-08-13
Location : Kansas
Re: epoxy bed 22 upper?
Merick wrote:It came with a new slide stop pin and guide rod, Im not buying replacements every 1000 rounds.Chris Miceli wrote:new slide stop pin and guide rod ?
I think the stop pin is hardened, anyhow there isn't a mark on it, and a new one isn't going to fit any different.
you are doing something wrong or your stuff is jacked. i would start with a new guide rod if you got no marks on your slidestop pin. worst case that barrel block is toast.
Chris Miceli- Posts : 2715
Join date : 2015-10-27
Location : Northern Virginia
Similar topics
» Mid to Upper level quality .45?
» Welding the upper hood of a 1911 barrel
» Hammerli SP20 upper
» Walther GSP upper to lower movement.
» Walter GSP 22lr upper/Conversion Kit
» Welding the upper hood of a 1911 barrel
» Hammerli SP20 upper
» Walther GSP upper to lower movement.
» Walter GSP 22lr upper/Conversion Kit
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum