Help identifying some parts...
+6
Jack H
Aprilian
AllAces
lyman1903
cdrt
Baydawg
10 posters
Page 1 of 1
Help identifying some parts...
I bought this at an online auction. I bought it for the rear sights and the model 41 bolt. Do any of you guys see anything else interesting? Ive identified a model 41 compensator and a model 52 firing pin...
Baydawg- Posts : 114
Join date : 2017-10-28
Age : 53
Location : Sylvan Lake, MI
Re: Help identifying some parts...
In the bottom photo you have a High Standard firing pin (probably for a Sharpshooter since the rear cut is too small for a Victor or Trophy) and what appears to be a BoMar rear sight.
cdrt- Posts : 844
Join date : 2016-04-12
Location : Amarillo, Texas
Baydawg- Posts : 114
Join date : 2017-10-28
Age : 53
Location : Sylvan Lake, MI
Re: Help identifying some parts...
second box has 2 41 hammers, and looks like an alloy and a steel weight, and the obvious bolt
the bottom pic, the two longer parts with a collar go with the 2 similar colored parts on either side of the box,
I've seen them in the past but cannot recall what they go to,, (maybe a mainspring housing?)
or I could be way off base
and the black plastic piece in the same box may be a magazine follower
the bottom pic, the two longer parts with a collar go with the 2 similar colored parts on either side of the box,
I've seen them in the past but cannot recall what they go to,, (maybe a mainspring housing?)
or I could be way off base
and the black plastic piece in the same box may be a magazine follower
Re: Help identifying some parts...
Top box, middle, an M52 bushing wrench. PM me if it is for sale.
AllAces- Posts : 745
Join date : 2011-08-30
Re: Help identifying some parts...
middle box - right hand long compartment - crooked part is m41 cocking indicator and 2 grip screws above that
Aprilian- Posts : 987
Join date : 2016-05-13
Location : Minnesota
Re: Help identifying some parts...
Not a High Std firing pin. My guess it's a 41 with all the other 41 stuff.cdrt wrote:In the bottom photo you have a High Standard firing pin (probably for a Sharpshooter since the rear cut is too small for a Victor or Trophy) and what appears to be a BoMar rear sight.
There are only two types HS firing pins. Early and late for the 102-107 guns. The difference is the notch for the retaining roll pin of 1/16 or 3/32, early, later respectively.
Jack H- Posts : 2699
Join date : 2011-06-10
Age : 75
Location : Oregon
Re: Help identifying some parts...
Got this too...
Baydawg- Posts : 114
Join date : 2017-10-28
Age : 53
Location : Sylvan Lake, MI
Re: Help identifying some parts...
52-2 slide
the top box: the left sight is for a short barrel 41 and the right sight is for an old 7 3/8" barrel style. also a 52 weight in that box it appears.
the top box: the left sight is for a short barrel 41 and the right sight is for an old 7 3/8" barrel style. also a 52 weight in that box it appears.
jglenn21- Posts : 2620
Join date : 2015-04-07
Age : 76
Location : monroe , ga
Re: Help identifying some parts...
is the big tube or rod in the bottom pic, threaded on the right side, hollow?
(as in can you see thru it?)
(as in can you see thru it?)
Re: Help identifying some parts...
Would you be willing to sell me one of your model 52-2 rear sight leaves pictured in top right of first pic? I have been looking for one for a while and no dice.
SmokinNJokin- Posts : 851
Join date : 2015-07-27
Location : Wisconsin Rapids
Re: Help identifying some parts...
I don't see one in there, but if you have the screw that holds the muzzle brake on a model 41, I would be interested in buying it.
BEA- Posts : 104
Join date : 2015-11-30
Re: Help identifying some parts...
lyman1903 wrote:is the big tube or rod in the bottom pic, threaded on the right side, hollow?
(as in can you see thru it?)
It sure is.
Baydawg- Posts : 114
Join date : 2017-10-28
Age : 53
Location : Sylvan Lake, MI
Re: Help identifying some parts...
that may be a sun shade for a rear sight,Baydawg wrote:lyman1903 wrote:is the big tube or rod in the bottom pic, threaded on the right side, hollow?
(as in can you see thru it?)
It sure is.
like an Anschutz type small bore rifle rear sight,
Similar topics
» Identifying Old 1” Red Dot
» I need some help identifying this piece.
» Help identifying custom 1911
» Need help identifying a grip
» A little help identifying grips
» I need some help identifying this piece.
» Help identifying custom 1911
» Need help identifying a grip
» A little help identifying grips
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum