Crimp with coated bullets
5 posters
Page 1 of 1
Crimp with coated bullets
I read here about crimp to .469 or .463 etc.
I was loading some missouri 200 SWC and I usually pull a bullet and look for a
breech in the coating. Like a ring into the lead. If its there, I back off on the crimp.
Getting .469-471 is about as far as I can go.
This is the same test recommended for plated bullets. I do not use plated bullets.
What are others crimping coated bullets to?
Have you pulled a bullet to see?
David
I was loading some missouri 200 SWC and I usually pull a bullet and look for a
breech in the coating. Like a ring into the lead. If its there, I back off on the crimp.
Getting .469-471 is about as far as I can go.
This is the same test recommended for plated bullets. I do not use plated bullets.
What are others crimping coated bullets to?
Have you pulled a bullet to see?
David
David R- Posts : 408
Join date : 2018-12-10
Age : 64
Location : Hamlin NY
Re: Crimp with coated bullets
I treat my hi-tek coted bullets exactly the same.as traditional lubed bullets.
jglenn21- Posts : 2618
Join date : 2015-04-07
Age : 76
Location : monroe , ga
Re: Crimp with coated bullets
Yea, what he said !jglenn21 wrote:I treat my hi-tek coted bullets exactly the same.as traditional lubed bullets.
Multiracer- Posts : 995
Join date : 2017-03-15
Location : North Ohio
Re: Crimp with coated bullets
I crimp all my .45 Hi-Tek bullets at .469. in 9mm I use .377
dlouque@yahoo.com- Posts : 7
Join date : 2015-02-26
Re: Crimp with coated bullets
Thnak you for the replies, I stay with .469 to .470
David
David
David R- Posts : 408
Join date : 2018-12-10
Age : 64
Location : Hamlin NY
Re: Crimp with coated bullets
I use Bayous hi-tek coated bullets for my 45 and crimp to .464-.465. With my pistol they seem to run better with that much crimp.
troystaten- Posts : 820
Join date : 2012-04-18
Similar topics
» What crimp for 9 mm, XTPs and coated?
» Coated bullets
» Hi-Tek Coated Bullets
» Powder Coated Bullets
» .45 ACP Coated Bullets
» Coated bullets
» Hi-Tek Coated Bullets
» Powder Coated Bullets
» .45 ACP Coated Bullets
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|