loads for 45 button bullets
+10
fc60
cdrt
zanemoseley
james r chapman
Dr.Don
10sandxs
lablover
Wobbley
bruce martindale
rreid
14 posters
Page 2 of 2
Page 2 of 2 • 1, 2
loads for 45 button bullets
First topic message reminder :
Can someone suggest a load for Missouri bullet co's 185gr 45 button bullet. I've had horrid results with loads of 3.6 N310 , 4.0 WST , crimped to .465 , various seating depths. The bullets are well cast , .452 dia. , weight spread of 1.5 grs hi-lo. I can't find fault with the bullets, but am getting >6" groups RR at 50 yds. vs <3" w/Zero 185 or200 lswc with similar loading . I've had trouble in the past with similar bullets from other suppliers . I thought that was the go to bullet design for accuracy , but I can't seem to get anything better than a rough pattern. At this point I'd be happy with a 3" group at 25 yds for short line practice , just to prevent having an almost full box of bullets go to waste. BTW , similar results with Zero 185 buttons, now discontinued? , Berry's 185 flat point. Gun is accurized , <2" w/ factory target ammo, Bar-Sto barrel. Any ideas? Richard
Can someone suggest a load for Missouri bullet co's 185gr 45 button bullet. I've had horrid results with loads of 3.6 N310 , 4.0 WST , crimped to .465 , various seating depths. The bullets are well cast , .452 dia. , weight spread of 1.5 grs hi-lo. I can't find fault with the bullets, but am getting >6" groups RR at 50 yds. vs <3" w/Zero 185 or200 lswc with similar loading . I've had trouble in the past with similar bullets from other suppliers . I thought that was the go to bullet design for accuracy , but I can't seem to get anything better than a rough pattern. At this point I'd be happy with a 3" group at 25 yds for short line practice , just to prevent having an almost full box of bullets go to waste. BTW , similar results with Zero 185 buttons, now discontinued? , Berry's 185 flat point. Gun is accurized , <2" w/ factory target ammo, Bar-Sto barrel. Any ideas? Richard
Richard Benoit- Posts : 73
Join date : 2018-10-27
Re: loads for 45 button bullets
What brand 45 colt die did you end up using
lablover- Posts : 1275
Join date : 2015-07-30
Location : Michigan
Re: loads for 45 button bullets
Lymanlablover wrote:What brand 45 colt die did you end up using
Richard Benoit- Posts : 73
Join date : 2018-10-27
Page 2 of 2 • 1, 2
Similar topics
» AA#7 loads with 147 gn bullets
» 9mm Loads; 115Gr Bullets
» Common loads for 124 and 147 gr XTP bullets?
» Loads for 32 S&W Long with coated bullets
» Zero Bullets Loads for Pardini GT45
» 9mm Loads; 115Gr Bullets
» Common loads for 124 and 147 gr XTP bullets?
» Loads for 32 S&W Long with coated bullets
» Zero Bullets Loads for Pardini GT45
Page 2 of 2
Permissions in this forum:
You cannot reply to topics in this forum
|
|