Bullseye-L Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Which recoil spring

+17
estuck
Aprilian
JIMPGOV
kjanracing
mikemyers
Olde Pilot
Jon Eulette
Jack H
DA/SA
Dcforman
hamdenman
Outthere
kc.crawford.7
james r chapman
jglenn21
Wobbley
Willfish30
21 posters

Page 3 of 3 Previous  1, 2, 3

Go down

Which recoil spring - Page 3 Empty Which recoil spring

Post by Willfish30 4/21/2019, 2:21 pm

First topic message reminder :

II have a Rock River Arms wadcutter with a bullseye rib and an Ultradot 25mm dot mounted on it. With Zero LSWC 200 and 185 gr, I am experiencing misfeeds. The are hanging up on the the feed ramp 2 or 3 times a box. Should I try a lighter or heavier recoil spring? It has about 1000 rounds through it.

Willfish30

Posts : 34
Join date : 2019-01-22
Location : NYC

Back to top Go down


Which recoil spring - Page 3 Empty Re: Which recoil spring

Post by Blsi2600 6/24/2019, 10:23 pm

What is a Colt dimple?

Blsi2600

Posts : 158
Join date : 2013-03-27
Location : SW ILLINOIS

Back to top Go down

Which recoil spring - Page 3 Empty Re: Which recoil spring

Post by james r chapman 6/25/2019, 6:15 am

Which recoil spring - Page 3 P_620000012_1
Blsi2600 wrote:What is a Colt dimple?
Colt magazine followers have small raised dimple in the middle.
james r chapman
james r chapman
Admin

Posts : 6373
Join date : 2012-01-31
Age : 75
Location : HELL, Michigan

Back to top Go down

Which recoil spring - Page 3 Empty Re: Which recoil spring

Post by kc.crawford.7 6/25/2019, 7:18 am

After reading through all of this again, I'm gonna say angle of the follower on the magazines.  If the angle is to shallow the rounds tends to come in lower on the feed ramp and probably from your description that's what is happening.  I have to adjust almost every follower angle with the exception of the Wilson plastic followers.
kc.crawford.7
kc.crawford.7

Posts : 736
Join date : 2012-12-09
Location : Maysville, NC

http://www.kcskustomcreations.com

Back to top Go down

Which recoil spring - Page 3 Empty Re: Which recoil spring

Post by Foundryratjim 7/1/2019, 3:20 pm

mikemyers wrote:
So if the gun was perfect from the factory, and let's say we're almost doubling the mass of the slide+sight, it seems to me that the spring would need to be made stronger.  What am I missing?



To me it seems that if you are shooting low power bullseye loads and you mount a red dot to the top of the slide you would have to use a lighter recoil spring.


Last edited by Foundryratjim on 7/1/2019, 3:22 pm; edited 1 time in total (Reason for editing : formatting)

Foundryratjim

Posts : 243
Join date : 2018-08-01
Age : 66
Location : michigan

Back to top Go down

Which recoil spring - Page 3 Empty Re: Which recoil spring

Post by Sponsored content


Sponsored content


Back to top Go down

Page 3 of 3 Previous  1, 2, 3

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum