Pardini 32 Extractors
4 posters
Page 1 of 1
Pardini 32 Extractors
Greetings,
For those that own Pardini HP's in 32 WadCutter and 32 ACP, how long do the extractors last?
I have a friend that replaces a broken one about every 12,000 rounds.
Cheers,
Dave
For those that own Pardini HP's in 32 WadCutter and 32 ACP, how long do the extractors last?
I have a friend that replaces a broken one about every 12,000 rounds.
Cheers,
Dave
fc60- Posts : 1459
Join date : 2011-06-11
Location : South Prairie, WA 98385
Re: Pardini 32 Extractors
No data from me yet. My 32acp probably has less than 4000 on it. But no problems so far.
Don
Don
Dr.Don- Posts : 816
Join date : 2012-10-31
Location : Cedar Park, TX
Re: Pardini 32 Extractors
I replaced one on my 32 wadcutter. I don’t keep track of rounds shot, but maybe 3-4,000.
gregbenner- Posts : 738
Join date : 2016-10-29
Location : San Diego area
Re: Pardini 32 Extractors
I got close to 100k on my original extractor. These are blowback guns so the extractor does not do too much other than guide the case out when the fired case hits the ejector on the magazine. If the fired case contacts the top cartridge in the magazine before hitting the ejector this will put a shock to the extractor. If you get stovepipe jams this might be your problem. Adjust your magazines to correct this situation. I did break a firing pin spring around 70k. I thought the 32SWL were the ones that broke extractors.
TampaTim- Posts : 104
Join date : 2013-02-27
Age : 72
Location : Tampa
Re: Pardini 32 Extractors
One Hundred ThousandI got close to 100k on my original extractor.
On one gun,
Damn.
I see it paid off:lol:
gregbenner- Posts : 738
Join date : 2016-10-29
Location : San Diego area
Similar topics
» Measuring..
» Having extractors made for S&W 52-1?
» 1911 Extractors
» Volquartsen - S&W Model 41 Extractors
» Mag Loader For Pardini SP and For Pardini HP
» Having extractors made for S&W 52-1?
» 1911 Extractors
» Volquartsen - S&W Model 41 Extractors
» Mag Loader For Pardini SP and For Pardini HP
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum