Cleaning Pardini bolt
+2
Dr.Don
orpheoet
6 posters
Page 1 of 1
Cleaning Pardini bolt
My .32 bolt gets so much dirtier than the .22. Is this something I need to detail strip on occasion? I havent found much info on taking apart a Pardini bolt. What do others do specifically with the .32.
orpheoet- Posts : 1054
Join date : 2014-07-29
Age : 56
Location : Berea, Oh
Re: Cleaning Pardini bolt
Have never stripped mine. Would only strip it if I suspected a problem.
Dr.Don- Posts : 816
Join date : 2012-10-31
Location : Cedar Park, TX
Re: Cleaning Pardini bolt
+1 I do occasionally spray some cleaner on them, and always wipe them down.Dr.Don wrote:Have never stripped mine. Would only strip it if I suspected a problem.
gregbenner- Posts : 738
Join date : 2016-10-29
Location : San Diego area
Re: Cleaning Pardini bolt
gregbenner wrote:+1 I do occasionally spray some cleaner on them, and always wipe them down.Dr.Don wrote:Have never stripped mine. Would only strip it if I suspected a problem.
What Greg and Dr. Don said.....
tray999- Posts : 119
Join date : 2017-12-26
Location : Virginia
Re: Cleaning Pardini bolt
Cool. The Pardini is with my M52-2 as far as not wanting to go past field stripping.
orpheoet- Posts : 1054
Join date : 2014-07-29
Age : 56
Location : Berea, Oh
Re: Cleaning Pardini bolt
I take out the firing pin! I watched a you tube video and it is very easy to remove and replace. 1 little press pin. It does get very dirty in there
James Hensler- Posts : 1245
Join date : 2018-01-15
Age : 55
Location : Southwest Florida
Re: Cleaning Pardini bolt
32 dirty?
Try some Hodgdon Titewad powder. That's what I load in mine and it's very clean.
Try some Hodgdon Titewad powder. That's what I load in mine and it's very clean.
Ghillieman- Posts : 468
Join date : 2012-02-14
Location : TEXAS
Similar topics
» Pardini bolt o-rings
» Drilling the bolt of a Pardini
» Pardini Sp .22 grip bolt
» Pardini MP HP SW Long ( Don Nygord) / bolt hold button disassembly
» Cleaning A Pardini
» Drilling the bolt of a Pardini
» Pardini Sp .22 grip bolt
» Pardini MP HP SW Long ( Don Nygord) / bolt hold button disassembly
» Cleaning A Pardini
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|