Bullseye-L Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Pardini Sp .22 grip bolt

2 posters

Go down

Pardini Sp .22 grip bolt Empty Pardini Sp .22 grip bolt

Post by chuck2942 8/14/2020, 2:23 pm

Would like to inquire about attaining a bolt for the grip on my Sp. was able to locate similar bolts at a local hardware store but the length was either too short or too long. Any info appreciated. Thank u.

chuck2942

Posts : 15
Join date : 2016-02-14

Back to top Go down

Pardini Sp .22 grip bolt Empty Re: Pardini Sp .22 grip bolt

Post by Aprilian 8/14/2020, 3:57 pm

Buy the longer bolt and 2 nuts of the same thread.   Measure the length you want and lock the two nuts together  just short of the final length.  Dremel or hacksaw the bolt to length and then file or sand the end smooth.   Taking the nuts off will chase the threads and make the bolt easier to start.  I usually take the first thread off so that the bolt centers and is much easier to start.
Aprilian
Aprilian

Posts : 987
Join date : 2016-05-13
Location : Minnesota

Back to top Go down

Pardini Sp .22 grip bolt Empty Re: Pardini Sp .22 grip bolt

Post by chuck2942 8/14/2020, 4:01 pm

Ok. Appreciate!

chuck2942

Posts : 15
Join date : 2016-02-14

Back to top Go down

Pardini Sp .22 grip bolt Empty Re: Pardini Sp .22 grip bolt

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum