Star 45 seating stem
3 posters
Page 1 of 1
Star 45 seating stem
Ladies and gents,
Does anyone have a modified seating stem for a Star press that will seat SWC lead on the shoulder and clear the height of a 200 G profile ?
Does anyone have a modified seating stem for a Star press that will seat SWC lead on the shoulder and clear the height of a 200 G profile ?
Last edited by Multiracer on Wed Feb 26, 2020 1:26 pm; edited 1 time in total
Multiracer- Posts : 1003
Join date : 2017-03-15
Location : North Ohio
Re: Star 45 seating stem
Steve Bathe? On ebay
Also if you grab a Lee seating die any monkey can drill it out to seat off the shoulder.
Also if you grab a Lee seating die any monkey can drill it out to seat off the shoulder.
Last edited by STEVE SAMELAK on Wed Feb 26, 2020 1:14 pm; edited 1 time in total (Reason for editing : after thought)
STEVE SAMELAK- Posts : 958
Join date : 2011-06-10
Re: Star 45 seating stem
I doubt that will work on a Star press. Sorry, I did not state the press make in my OPSTEVE SAMELAK wrote:Steve Bathe? On ebay
Also if you grab a Lee seating die any monkey can drill it out to seat off the shoulder.
Multiracer- Posts : 1003
Join date : 2017-03-15
Location : North Ohio
Re: Star 45 seating stem
Greetings,
Contact Bruce at Star Machine Works.
(908) 750-6312
Cheers,
Dave
Contact Bruce at Star Machine Works.
(908) 750-6312
Cheers,
Dave
fc60- Posts : 1459
Join date : 2011-06-11
Location : South Prairie, WA 98385
Re: Star 45 seating stem
Skip it, I took mine apart, did some measuring and added depth to the center and thinned out the edge so as to seat squarely on the shoulder. It will now seat 160, 185 swhp, and 200's with no adjustment.
Multiracer- Posts : 1003
Join date : 2017-03-15
Location : North Ohio
Similar topics
» Star Bushing Manufacturer other than Star?
» Seating Die/Stem for 38 Wadcutter
» Hornady seating problems
» Redding 32ACP seating die stem is too short?
» Expander Stem Maintenance
» Seating Die/Stem for 38 Wadcutter
» Hornady seating problems
» Redding 32ACP seating die stem is too short?
» Expander Stem Maintenance
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum