Fusion firearms slides
+2
jglenn21
10sandxs
6 posters
Page 1 of 1
Fusion firearms slides
took a chance... barrel channel oversize, slide rails undersize... gonna have to squeeze a new slide to fit the the frame I wanted to fit it to... crap... so much for them as a vendor...
10sandxs- Posts : 971
Join date : 2016-01-29
Re: Fusion firearms slides
Used one for a wadcutter build. It was ok but not my normal specs as you noted.. try their links sometime. random odd lengths for most any numbers.. they do fit the odd build every so often
jglenn21- Posts : 2618
Join date : 2015-04-07
Age : 76
Location : monroe , ga
Re: Fusion firearms slides
Same as above. Two six inch slides and both measure out completely different from each other. It’s made for some frustrating fitting.
Thisisyourcaptin- Posts : 5
Join date : 2020-07-17
Re: Fusion firearms slides
Greetings,
Have you contacted Fusion in person?
Perhaps they would exchange the faulty/undesirable part for a different one?
Maybe send the frame to them and offer a few bucks extra to hand select one?
Cheers,
Dave
Have you contacted Fusion in person?
Perhaps they would exchange the faulty/undesirable part for a different one?
Maybe send the frame to them and offer a few bucks extra to hand select one?
Cheers,
Dave
fc60- Posts : 1451
Join date : 2011-06-11
Location : South Prairie, WA 98385
Re: Fusion firearms slides
fc60 wrote:Greetings,
Have you contacted Fusion in person?
Perhaps they would exchange the faulty/undesirable part for a different one?
Maybe send the frame to them and offer a few bucks extra to hand select one?
Cheers,
Dave
I plan to call them Monday to see what options are. No way an I sending them a frame. If they can't measure, the dimensions id like to see, well... that says a lot right there...
10sandxs- Posts : 971
Join date : 2016-01-29
Thisisyourcaptin likes this post
Re: Fusion firearms slides
I have a little bit of experience here. I live 30 mins from Fusion and they can be somewhat of a prick so try not to get mad. The girl who answers the phone is not the person you need to talk to. Fusion a a super small company and I had always heard good things. Once I was there waiting on a part to come up and the owner was going off big time on a bluing company. I mean it was ( DELETED, LANGUAGE NOT SUITABLE FOR THIS FORUM!
Last edited by james r chapman on 8/25/2020, 8:37 am; edited 2 times in total (Reason for editing : Unacceptable language,)
James Hensler- Posts : 1245
Join date : 2018-01-15
Age : 55
Location : Southwest Florida
Re: Fusion firearms slides
I once ordered a 9mm 1911 slide stop.
they apparently assume 9mm and 45 are the same thing.
But, offered to accept a return.
they apparently assume 9mm and 45 are the same thing.
But, offered to accept a return.
james r chapman- Admin
- Posts : 6359
Join date : 2012-01-31
Age : 75
Location : HELL, Michigan
Similar topics
» Fusion Firearms
» Fusion Firearms components
» Fusion Firearms CS sucks
» Frame for .22 Nelson Conversion
» Fusion frame for 22 conversion
» Fusion Firearms components
» Fusion Firearms CS sucks
» Frame for .22 Nelson Conversion
» Fusion frame for 22 conversion
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|