S&W model 41 bolt pin breaking
+4
kc.crawford.7
Sa-tevp
troystaten
tyro
8 posters
Page 1 of 1
S&W model 41 bolt pin breaking
hi all.have been shooting S&W model 41 quite a bit,and the bolt pin broke and landed on my thumb while shooting.ordered new pin,how long do they last or any way to prevent this.factory recoil spring,cci std 40gr lead ammo.thanks for any help.tyro
tyro- Posts : 28
Join date : 2018-03-15
Location : livingston nj
Re: S&W model 41 bolt pin breaking
I have never heard of one breaking, have put many 1000's of rounds through mine, hope that does not happen.
troystaten- Posts : 823
Join date : 2012-04-18
Re: S&W model 41 bolt pin breaking
From research if the bolt pin breaks the bolt is not seated (supported) in the slide and the bolt pin is taking the load. KC Crawford can probably give you more information on this condition and how to correct it.
Sa-tevp- Posts : 961
Join date : 2013-07-20
Location : Georgia
Re: S&W model 41 bolt pin breaking
Best guess is bolt was / is loose in slide. Retaining pin was taking the brunt of recoil trying to hold bolt in place. If your bolt is loose in the slide it needs to be tightened up and then have the alignment checked with the barrel.
Re: S&W model 41 bolt pin breaking
After many 1000's of rounds, I've had an extractor break. In replacing it, I found the pin holding the slide together was broken. Perhaps your problem is related?
joem5636- Posts : 96
Join date : 2011-06-11
Re: S&W model 41 bolt pin breaking
I heard of them breaking before. You might ask KC about it. My cross pin was installed backwards so I reversed it. When I did I took out the bolt and cleaned the firing pin and extractor. My bolt was loose and came out easy. I am curious if I will have future problems with mine.
Sorry, KC I did not see you posted before me.
Sorry, KC I did not see you posted before me.
Last edited by Domino1 on Mon Sep 28, 2020 5:49 pm; edited 1 time in total
Domino1- Posts : 81
Join date : 2019-04-05
Re: S&W model 41 bolt pin breaking
When I was still shooting my 41, the pin broke - no idea why, except that it's been in gun since the 1970's, and was used before I bought it. I replaced the pin, put in other new parts, and a Volquartsen extractor. The gun will probably be listed for sale here sometime in the near future. It's been replaced by 3 High Standards (one will be listed for sale) and a Nelson. I put a Clark barrel and rail on the gun, but how many 22's should a person own?
mikemyers- Posts : 4236
Join date : 2016-07-26
Age : 80
Location : South Florida, and India
THANKS
THANKS FOR REPLY REPLACED PIN SET WITH PUNCH NICE N TIGHT, SHOT 200 RDS TODAY WORKS FINE.WE WILL SEE HOW LONG PIN LAST.TYRO
tyro- Posts : 28
Join date : 2018-03-15
Location : livingston nj
Re: S&W model 41 bolt pin breaking
mikemyers wrote:When I was still shooting my 41, the pin broke - no idea why, except that it's been in gun since the 1970's, and was used before I bought it. I replaced the pin, put in other new parts, and a Volquartsen extractor. The gun will probably be listed for sale here sometime in the near future. It's been replaced by 3 High Standards (one will be listed for sale) and a Nelson. I put a Clark barrel and rail on the gun, but how many 22's should a person own?
> but how many 22's should a person own?
As many as you can.
Doug Tiedt- Posts : 150
Join date : 2015-05-29
troystaten and oxbowbob like this post
Re: S&W model 41 bolt pin breaking
Thank you, I think. ???
mikemyers- Posts : 4236
Join date : 2016-07-26
Age : 80
Location : South Florida, and India
Similar topics
» Bolt pin for a Model 41
» S&W Model 41 Bolt questions
» S&W Model 41 Bolt Replacement
» Cleaning Pardini bolt
» Trigger breaking to low
» S&W Model 41 Bolt questions
» S&W Model 41 Bolt Replacement
» Cleaning Pardini bolt
» Trigger breaking to low
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum