185 JHP load for hard ball 45ACP???
+8
ric1911a1
James Hensler
Wes Lorenz
orpheoet
Jon Eulette
mspingeld
chiz1180
Mark Jenkins
12 posters
Page 1 of 1
185 JHP load for hard ball 45ACP???
Just got a 45 for hard ball been using a 9MM for years.
Never used the 185 JHP what is a good load to use?
Thanks
Mark
Never used the 185 JHP what is a good load to use?
Thanks
Mark
Mark Jenkins- Posts : 29
Join date : 2011-06-17
Location : Northwest New Jersey
Re: 185 JHP load for hard ball 45ACP???
4.4-4.6 Bullseye
chiz1180- Posts : 1510
Join date : 2019-05-29
Location : Ohio
Al and LenV like this post
Re: 185 JHP load for hard ball 45ACP???
4.5 N310, 1.205 OAL, .469 crimp
mspingeld- Admin
- Posts : 835
Join date : 2014-04-19
Age : 64
Location : New Jersey
James Hensler likes this post
Re: 185 JHP load for hard ball 45ACP???
Those are warmer loads. I use 3.8-4.0 BE with 185 jhp and have maintained 280+ NMC average with ZERO practice. Not bad for being blind; well iron sights do make me feel that way lol
Rules allow powder puff loads now so that’s what I mostly shoot. Use same load for 230’s.
Jon
Rules allow powder puff loads now so that’s what I mostly shoot. Use same load for 230’s.
Jon
Jon Eulette- Posts : 4399
Join date : 2013-04-15
Location : Southern Kalifornia
Re: 185 JHP load for hard ball 45ACP???
I use 4.2gr N310, 1.2" COL 0.469 crimp.
orpheoet- Posts : 1054
Join date : 2014-07-29
Age : 56
Location : Berea, Oh
Re: 185 JHP load for hard ball 45ACP???
The best factory 185JHP I have been able to try so far is ASYM. It works very well in both of my 1911's. Slide mounted red dot or irons.
I tried to replicate the ASYM performance using Nosler 185 JHP bullets. Found that 4.3 N310 is almost identical. 1.200. 0.439.
I tried to replicate the ASYM performance using Nosler 185 JHP bullets. Found that 4.3 N310 is almost identical. 1.200. 0.439.
Guest- Guest
Re: 185 JHP load for hard ball 45ACP???
Roy,
.439" crimp? c The cross section would equal to Rachel Welch's.
.439" crimp? c The cross section would equal to Rachel Welch's.
Wes Lorenz- Posts : 443
Join date : 2011-06-27
Location : Washington
Re: 185 JHP load for hard ball 45ACP???
Remember folks ever barrel is alittle different. With mine I tested 3.8 to 4.5 of N310 and my gun shot 4.5 the best. These were 50 shot groups
James Hensler- Posts : 1245
Join date : 2018-01-15
Age : 55
Location : Southwest Florida
Re: 185 JHP load for hard ball 45ACP???
4.4 of WST in both my ball and wadcutter guns.............
Ric
Ric
ric1911a1- Posts : 338
Join date : 2013-05-07
Location : Upstate NY (the good part)
Re: 185 JHP load for hard ball 45ACP???
.469-.472 crimp for jhp
james r chapman- Admin
- Posts : 6373
Join date : 2012-01-31
Age : 75
Location : HELL, Michigan
Re: 185 JHP load for hard ball 45ACP???
"I" would only add that the load which is the most accurate out of your gun, may not be the same as the load which "you" shoot the best. Ransom rests are not allowed on the line. Develop the load which "you" shoot the best. It probably will be a little softer than the most accurate load.
If using 185 JHPs in .45, start around 3.9 grains with Clays, 4.0 with either BE or VV N310 or 4.1 with WST. Depending on how your gun is sprung, magazines and grip, you may need to up it a tad to start. I think you will find a good load very quickly within a couple/few tenths of these starting points using these powders. Crimp as needed to suite your gun's chamber/throat. Around .469 - .471 is likely the sweet spot as well. OAL plus or minus a few thousands of 1.200".
If using 185 JHPs in .45, start around 3.9 grains with Clays, 4.0 with either BE or VV N310 or 4.1 with WST. Depending on how your gun is sprung, magazines and grip, you may need to up it a tad to start. I think you will find a good load very quickly within a couple/few tenths of these starting points using these powders. Crimp as needed to suite your gun's chamber/throat. Around .469 - .471 is likely the sweet spot as well. OAL plus or minus a few thousands of 1.200".
Allgoodhits- Posts : 901
Join date : 2017-09-17
Location : Southport, NC
Re: 185 JHP load for hard ball 45ACP???
4.3 of 452AA
Crimp and OAL in line with what others have stated. I tried to match my reloads off of what I measured of the ASYM ammo.
Crimp and OAL in line with what others have stated. I tried to match my reloads off of what I measured of the ASYM ammo.
john bickar- Posts : 2280
Join date : 2011-07-09
Age : 100
Location : Menlo Park, CA
Re: 185 JHP load for hard ball 45ACP???
Wes Lorenz wrote:Roy,
.439" crimp? c The cross section would equal to Raquel Welch's.
That would be one sexy round. Like Bugs Bunny wearing lipstick. *whistle*
john bickar- Posts : 2280
Join date : 2011-07-09
Age : 100
Location : Menlo Park, CA
Re: 185 JHP load for hard ball 45ACP???
You guys!
Yes, a slip of the typing finger! 6, not 3.
At least you are all paying attention
Yes, a slip of the typing finger! 6, not 3.
At least you are all paying attention
Guest- Guest
Re: 185 JHP load for hard ball 45ACP???
And John B.
I would never have guessed that you are a student of "Bunny Girls"!
I would never have guessed that you are a student of "Bunny Girls"!
Guest- Guest
Re: 185 JHP load for hard ball 45ACP???
Looks like a .439 waist to me.
john bickar- Posts : 2280
Join date : 2011-07-09
Age : 100
Location : Menlo Park, CA
spyer40 likes this post
Re: 185 JHP load for hard ball 45ACP???
I was thinking more like Jessica Rabbit
https://images.app.goo.gl/ruF59NwzpApr9wHB6
https://images.app.goo.gl/ruF59NwzpApr9wHB6
Motophotog7- Posts : 136
Join date : 2020-01-04
Location : Clifton Park, NY
Similar topics
» .45ACP Match Ball
» 45ACP light load - where to buy ?
» .45ACP magic load ?
» Need load data for Titegroup 45ACP
» Newbie 45ACP bullseye load question
» 45ACP light load - where to buy ?
» .45ACP magic load ?
» Need load data for Titegroup 45ACP
» Newbie 45ACP bullseye load question
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum