Need load data for Titegroup 45ACP
3 posters
Page 1 of 1
Need load data for Titegroup 45ACP
I'm gonna start testing at 25 yards with the new Range Officer. I happen to have Titegroup (I was using it in a 45 LC) and was wondering what powder charges should I start at? I have plenty of books and know what not to exceed but I'm looking to start with low recoil charges.
185 grain LSWC is what bullet I'm using.
185 grain LSWC is what bullet I'm using.
Tim:H11- Posts : 2133
Join date : 2015-11-04
Age : 36
Location : Midland, GA
Re: Need load data for Titegroup 45ACP
somewhere around 4.0 gr should get you in the ballpark
jglenn21- Posts : 2620
Join date : 2015-04-07
Age : 76
Location : monroe , ga
Re: Need load data for Titegroup 45ACP
Did you check the sticky? There are several loads with Titegroup.
JayhawkNavy02- Posts : 821
Join date : 2014-03-01
Age : 45
Location : San Diego
Re: Need load data for Titegroup 45ACP
Anyone find anything accurate below 4 grains?
I'm thinking of trying 3.8, 4.0, and 4.2 and see what I get on paper.
I'm thinking of trying 3.8, 4.0, and 4.2 and see what I get on paper.
Tim:H11- Posts : 2133
Join date : 2015-11-04
Age : 36
Location : Midland, GA
Re: Need load data for Titegroup 45ACP
From Terry
4.0 Titegroup
Magnus 801 185gr LSWC
1.128-1.130 OAL
That load works at 25 so you may be able to download it and hold the X-ring at 25. I've take Jon's advice and followed that path. It make for some more reloading time, but I appreciate the reduced recoil on the short line.
4.0 Titegroup
Magnus 801 185gr LSWC
1.128-1.130 OAL
That load works at 25 so you may be able to download it and hold the X-ring at 25. I've take Jon's advice and followed that path. It make for some more reloading time, but I appreciate the reduced recoil on the short line.
JayhawkNavy02- Posts : 821
Join date : 2014-03-01
Age : 45
Location : San Diego
Re: Need load data for Titegroup 45ACP
Thanks Jay
Tim:H11- Posts : 2133
Join date : 2015-11-04
Age : 36
Location : Midland, GA
Similar topics
» 38 Titegroup load
» 9mm Hardball Loads
» .32 S&W Long
» I’m struggling with load data
» Accurate No. 5 load data
» 9mm Hardball Loads
» .32 S&W Long
» I’m struggling with load data
» Accurate No. 5 load data
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum