Narrow down 9mm load options for 1:10 CZ
5 posters
Page 1 of 1
Narrow down 9mm load options for 1:10 CZ
I am working on a load for my CZ Shadow 2. I am getting about 3 inch groups at 25 yards with 2.9 HP38 and 125 MBC Hi-Tek SWC. I'd like to cut that down. I'm shooting from a bench, but no sandbags or ransom rest.
I have 124 MBC Small Ball RN, 124 XTP JHP, 125 MBC SWC, 125 HAP JHP, Acme 147 FP, and RMR 147 RN FMJ. MBC and Acme are both coated.
I have Clays, HP38/Win231, 700x, WSF, and Tightgroup.
I've read a lot of information and sounds like the 1:10 prefers the heavy bullets and fast powders. I like the holes from the SWC and recoil is crazy managible.
I have 124 MBC Small Ball RN, 124 XTP JHP, 125 MBC SWC, 125 HAP JHP, Acme 147 FP, and RMR 147 RN FMJ. MBC and Acme are both coated.
I have Clays, HP38/Win231, 700x, WSF, and Tightgroup.
I've read a lot of information and sounds like the 1:10 prefers the heavy bullets and fast powders. I like the holes from the SWC and recoil is crazy managible.
Last edited by Packeagle on 8/27/2021, 8:12 am; edited 1 time in total
Packeagle- Posts : 34
Join date : 2021-08-26
Re: Narrow down 9mm load options for 1:10 CZ
Try 4.4-4.7 WSF with Jacketed and 4.0-4.4 WSF with lead. I load CFEPistol at 5.3 with a 115 and it shoots well enough. WSF is just a pinch faster so it should do OK.
Wobbley- Admin
- Posts : 4805
Join date : 2015-02-13
Packeagle likes this post
Re: Narrow down 9mm load options for 1:10 CZ
124GR XTP WITH 5.0GR WSF IS A GREAT 9MM LOAD. 147GR RMR WITH 4.0GR WSF, IS GOOD ALSO. JP
JIMPGOV- Posts : 657
Join date : 2011-09-27
Packeagle likes this post
Re: Narrow down 9mm load options for 1:10 CZ
I forgot to inclue that I also have 125 HAP. I assume I could load the HAP the same as the XTP as they are almost the same bullet.JIMPGOV wrote:124GR XTP WITH 5.0GR WSF IS A GREAT 9MM LOAD. 147GR RMR WITH 4.0GR WSF, IS GOOD ALSO. JP
WSF seems like the consensus so far here. I'll load up some different bullets with a few loads of that and see what results I come up with. It's good to narrow down all the options to get a starting point.
Packeagle- Posts : 34
Join date : 2021-08-26
Re: Narrow down 9mm load options for 1:10 CZ
There are 125 HAP load recipes online for powder manufacturers' max and min.Packeagle wrote:I forgot to inclue that I also have 125 HAP. I assume I could load the HAP the same as the XTP as they are almost the same bullet.JIMPGOV wrote:124GR XTP WITH 5.0GR WSF IS A GREAT 9MM LOAD. 147GR RMR WITH 4.0GR WSF, IS GOOD ALSO. JP
WSF seems like the consensus so far here. I'll load up some different bullets with a few loads of that and see what results I come up with. It's good to narrow down all the options to get a starting point.
Bigtrout- Posts : 417
Join date : 2015-06-21
Age : 84
Location : Richmond, VT
Re: Narrow down 9mm load options for 1:10 CZ
4.0 WSF with 145 lead or 147 JHP absolutely drills the long line and is clean. I use that load in all 1:10 and even 1:16 barrels. Fantastic in carbines as well like my Skorpion EVO.
SmokinNJokin- Posts : 851
Join date : 2015-07-27
Location : Wisconsin Rapids
Similar topics
» Options for getting a pet load to cycle - 38 Super
» Load question on Penn Bullets for Distinguished load
» Hornady Lock-N-Load AP vs Lee Load Master
» Goodbye Hornady 0.311" 60 Grain XTP
» AP Dot options
» Load question on Penn Bullets for Distinguished load
» Hornady Lock-N-Load AP vs Lee Load Master
» Goodbye Hornady 0.311" 60 Grain XTP
» AP Dot options
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum