208S spares wanted

If you have any extra or unwanted 208S spares, please contact me directly.

• front sight blades
  
• rear sight blades
  
• tool kits (partial or complete)
  
• springs (various)
  
• other
  

Thanks!

Don Plante used to carry Hammerli parts.
I believe he still does.
Not sure if contact info is up to date:
https://www.ffls.com/ffl/986013013f38012/plante-donald-r

You can call Interarms @ 713-476-0888 for Factory Specification Parts.- Alan Aronstein

Red Feather has a lot of Hammerli parts

The Don Plante contact info provided by Bill is still valid. AFAIK. I do not know whether he still has Hammerli parts in hand, but bound to still have something.

Thanks for the suggestions. I will reach out to Don today.

Too bad Jim left Red Feather. Wish it was still LGI.

I purchased TX recoil springs via Red Feather. The OD is too small; upon compression they'll squirt out of the channel and then wedge between the frame and barrel. By the time you extract them, they will stretch and distort. I destroyed two such springs by manually cycling the slide. 

Fyi, the 208 needs an 0.200" OD recoil spring. Sean Wolff fixed me up with a cross-reference that required trimming, but it worked! The OD was spot-on, except for the ends which I trimmed off. (The end windings grew to about 0.205".)