Pardini 32 Extractor

Any Pardini 32 shooters have problems with their extractor breaking? The tip of mine broke off with about 100 rounds through it. Had to buy a new one, hope it last's longer. According to Pardini it's not broken in yet.

I know from experience that their .22 extractors are quite hard and brittle.  I had one that was slightly bowed, probably from warping during heat treatment.  It snapped very easily in the middle when I gently tried to straighten it.

I had extractor on one of my HP32s broken within same number of rounds.  However that was totally on me as I used "hot" ammo.  Lesson learned!  If you are loading your own, must be very cognizant that it is very low pressure round.  +/- tens of a grain might cover range from too little to too much.

AP

What do you call a hot load? I was using Magtech 98gr . I normally use 1.7gr of 231 with a 98gr DEWC.
Where did you guys get your extracter from?

Aside from their ridiculously high shipping charges for small parts, what's wrong with Pardini USA?

https://www.pardiniguns.com/store/product_info.php?cPath=2_46_20&products_id=48

You probably want at least one spare.  I'd also order anything else you can think you might need so the shipping isn't a large percentage of the cost.