For my BAIKAL IZH35M I need extractor, extractor plunger, extractor spring. Please help!!

Hello, I got recently my BAIKAL IZH35M and it has missing parts in it.
Please would appreciate if I get help on my issue.  
Even would appreciate info who can craft replacement parts for it.
Since the model is discontinued I am also interested to get any other parts for it.
Please contact me.
Thank you.
Regards.

That's terrible! What did the seller say?

I have a friend who might be able to help....cross your fingers...

The FFL Seller is looking forward to help me on the issue.
Unfortunately the manufacturer IZHMASH is no longer support the IZH35M model.
I am curious why such issue still exists in my opinion some one can have excellent business only on crafting replacement parts for such gun. 
May someone does that.
After some time I did signup at forums to find out my options.. ))
Hope for the best.

I learned the Izzy's had problems with the extractors.


There's a good thread from 2009 on TargetTalk dealing with the 35m extractor.  It has good pictures, some blueprints and the address of a machinist who's made them.

http://www.targettalk.org/viewtopic.php?f=4&t=22381&sid=dfd42a74012061988e88e1a7fd8bfc5c&start=20

The most relevant post is this one:
After 400 shoots, inspection of the fabricated extractor showed no ware, so it was decided not to temper it, since hardness also increases the risk of fracture, the metal used was S7 steel.
This is the company who did the part:
TMS
Precision Machining Inc.
P.O.Box 1681
Tullytown PA 19007
tms19007@myway.com

If you need an extractor fabricated contact them.
They kept the original extractor for tracing in case someone else wants one.

My friend had the info on the link above as well as these great images.  A skilled machinist might be able to make the part from the diagram and the info on the link.  Good luck!

Rob,
Thank you very much!
I will contact the TMS  Precision Machining Inc.
Regards.
HUGO BOSS USA ))

Caution to anyone wanting to buy one of these!!!!!! these guns are now very obsolete as spare parts have long dried up, great guns but had very weak steel that leads to many failure's of parts, the bolt faces peen down over time and cause doubling is a big issue.

This was the best place to find parts and may still have a few left but I wouldn't hope for a home run.

https://www.gunpartscorp.com/Manufacturers/Baikal-33143/AutoPistols-35331/IZH35MTargetPistol-35258.htm

Thank you David.
I've learned that original parts for IZH35M are available now only if someone selling own parts from the gun. 
Hope a machinist I met will make those extractor parts for my gun.
Regards.