Aimpoint Mount for Pardini SPBE

Does anyone currently produce a mount that will fit an Aimpoint H-1 or H-2 that will fit the groove (19mm I believe) of a Pardini SPBE groove without drilling and tapping?  Looking for something similar to their ring setup with Ultradot that would work with an Aimpoint.

You can send the scope or just the base to Pardini and they will machine it to work. What they to do is machine the bottom of the base until it has sharp edges that fit into the dovetail.

I machined my own base as Pardini does. It works but since the 19mm dovetail is wider than the Weaver, the scope is off center by a few mm.

You can try the CZ-USA Weaver Adapter rail 550 19MM dovetail. Product Number: 19011 $82
This should fix the off center problem but will raise the scope.

I talked to Greg Derr a while ago and he said file down the mount till it fits. I believe Jon Eulette has made one work.

one of the benefits of the Kodiak base that KC sells over the Aimpoint factory is that it will mount center on the Pardini(after fitted)  Its also much more robust..not that it matters on a 22.

The Kodiak is a Full weaver and the Aimpoint factory is the other thing.

Ok, did KC do your fitting?  

I plan to move to Aimpoint this off season.  I shoot .22LR & .32ACP with my Pardini and don't have a solution that I like.  I've even had direct contact with Fred Totts about a prototype he made but he's not satisfied with it so that won't be an immediate option.

I didnt shoot a dot on a Pardini when I had it. But KC sells the Kodiak base that you can hack on to make it fit. You gotta ask KC if we would machine it to fit a Pardini.