Bullseye-L Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

126 Dardas SWC size for .38 Super

+2
jglenn21
dronning
6 posters

Go down

126 Dardas SWC size for .38 Super Empty 126 Dardas SWC size for .38 Super

Post by dronning Tue Aug 08, 2017 12:50 pm

Need info on 126 Dardas SWC (for .38 super). 

I apologize in advance I asked this before but didn't put the answer in my loading notes and now I can't find the post either.

Dardas gives you option to order the 126 SWC in .356, .357 or .358 diameters. Which do you use?  I'd assume .356 or .357.
I do have in my notes 3.5-3.6 of BE and a length of .987 What about crimp?


- Dave
Yep - I finally got my 9mm off to KC to have a .38 Super barrel fit (Clark 1-10 twist).
dronning
dronning

Posts : 2581
Join date : 2013-03-20
Age : 71
Location : Lakeville, MN

Back to top Go down

126 Dardas SWC size for .38 Super Empty Re: 126 Dardas SWC size for .38 Super

Post by jglenn21 Tue Aug 08, 2017 1:16 pm

Easy... Ask KC what size the Clark barrel is.. then order a bullet .001 larger...

"most" aftermarket supers are .355... We run .356 Dardus in our Kart and KKM
jglenn21
jglenn21

Posts : 2620
Join date : 2015-04-07
Age : 76
Location : monroe , ga

Back to top Go down

126 Dardas SWC size for .38 Super Empty Re: 126 Dardas SWC size for .38 Super

Post by zanemoseley Tue Aug 08, 2017 1:57 pm

Make sure you come back and tell us how well you get the Dardas bullets to shoot out of your 1:10 twist. Jimmy & crew uses 1:16 twists in the low 700fps to get sub 2" groups, it will be interesting to see what you get. I'm going to get my Sig 38 rebarreled and get a rail installed for a dot in the next few months, I plan on trying to use the lighter bullets, the goal is reduced recoil after all.


Last edited by zanemoseley on Tue Aug 08, 2017 2:01 pm; edited 1 time in total

zanemoseley

Posts : 2688
Join date : 2015-07-11
Location : Cookeville, TN

Back to top Go down

126 Dardas SWC size for .38 Super Empty Re: 126 Dardas SWC size for .38 Super

Post by Jon Eulette Tue Aug 08, 2017 1:59 pm

KKM recently tested 1:10 twist and it wouldn't shoot/group over 750ish fps. They're sticking to 1:16 twist. I'll be building one soon in .38 Super.
Jon
Jon Eulette
Jon Eulette

Posts : 4399
Join date : 2013-04-15
Location : Southern Kalifornia

Back to top Go down

126 Dardas SWC size for .38 Super Empty Re: 126 Dardas SWC size for .38 Super

Post by noylj Wed Aug 09, 2017 9:56 pm

If I had to order, it would be 0.357".
I much prefer to order as-cast and lube myself without any sizing.

noylj

Posts : 433
Join date : 2012-03-10
Age : 75
Location : SW USA

Back to top Go down

126 Dardas SWC size for .38 Super Empty Re: 126 Dardas SWC size for .38 Super

Post by dsandula Fri Aug 11, 2017 6:51 am

You can also just e mail or call Matt Dardas to talk it over.  He'd be happy to help and you can find contact info on his web site.

dsandula

Posts : 72
Join date : 2013-08-20

Back to top Go down

126 Dardas SWC size for .38 Super Empty Re: 126 Dardas SWC size for .38 Super

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum