Hornady and Zero 148 gr HBWC
3 posters
Page 1 of 1
Hornady and Zero 148 gr HBWC
I bought some of each and found quite a difference
Hornady's measure .358 at the top and .355 at the hollow base end
Zero's measured .360 at both ends
Why such a difference between the two ? How would these differences affect accuracy ?
I don't understand why there is such a difference in measurements between these two.
Hornady's measure .358 at the top and .355 at the hollow base end
Zero's measured .360 at both ends
Why such a difference between the two ? How would these differences affect accuracy ?
I don't understand why there is such a difference in measurements between these two.
rebs- Posts : 273
Join date : 2015-02-11
Re: Hornady and Zero 148 gr HBWC
I just measured a dozen Zeros from a new box of 500. Every one is .358 or .357.5 ?
I did not find a .360 in the dozen. Wipe the lube junk off before you place your calipers on the body.
I did not find a .360 in the dozen. Wipe the lube junk off before you place your calipers on the body.
Multiracer- Posts : 998
Join date : 2017-03-15
Location : North Ohio
Re: Hornady and Zero 148 gr HBWC
Have to clean them first.guarantee they are not .360!
james r chapman- Admin
- Posts : 6372
Join date : 2012-01-31
Age : 75
Location : HELL, Michigan
Similar topics
» Hornady 32 S&W HBWC
» loading 38 hbwc's on a Hornady LNL
» Hornady 148gr HBWC vs Magnus?
» Good substitute for Hornady 148 gr HBWC?
» Hornady HAP
» loading 38 hbwc's on a Hornady LNL
» Hornady 148gr HBWC vs Magnus?
» Good substitute for Hornady 148 gr HBWC?
» Hornady HAP
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum