Model 41 Wolff Springs
4 posters
Page 1 of 1
Model 41 Wolff Springs
I am considering tuning up the springs in my pre-70s Model 41, which is just starting to fail on feeding and extracting. Could be magazine and/or extractor, but thinking a new recoil spring wouldn't hurt as a starting point. What would a good start be for selecting a Wolff spring? I have no idea the weight of the OEM spring, so I don't know where to start with a replacement (Wolff 6#, 6.5#, or 7#).
Cheers!
Cheers!
230Ball- Posts : 97
Join date : 2012-08-26
Location : Virginia
Re: Model 41 Wolff Springs
I called Wolfe and told them what I had and they told me what springs I needed.
Installed them and gun ran perfectly afterwards.
Installed them and gun ran perfectly afterwards.
bmize1- Posts : 269
Join date : 2015-05-21
Location : AL
Re: Model 41 Wolff Springs
Thanks, I'll give them a call Monday!
230Ball- Posts : 97
Join date : 2012-08-26
Location : Virginia
Re: Model 41 Wolff Springs
Wolff web site says 7.5# standard (SKU 46775).
Model 41 recoil springs listed about 1/3 down this page:
https://www.gunsprings.com/SMITH%20&%20WESSON/NUMBERED%20SERIES/cID1/mID58/dID261#876
Model 41 recoil springs listed about 1/3 down this page:
https://www.gunsprings.com/SMITH%20&%20WESSON/NUMBERED%20SERIES/cID1/mID58/dID261#876
SonOfAGun- Posts : 172
Join date : 2017-08-12
Location : Midwest
Re: Model 41 Wolff Springs
Make sure you install correctly no matter which weight you get. Wolff recoil springs have an open end and a closed end with the coils in the spring. Make sure you put the open end towards the trigger up against the frame and let the closed end ride the recoil spring guide. If you reverse this the open end will chew up your recoil spring guide with deep gouges and you will either be buying a new spring guide or polishing out the old one. Don't ask how I now this.
Virgil
Virgil
Virgil Kane- Posts : 574
Join date : 2011-06-10
Similar topics
» Wolff springs for Benelli, etc. ?
» Changing recoil springs in a model 41
» Looking for springs
» Choosing correct recoil spring weight
» Wolff 1911 Variable power or standard recoil spring
» Changing recoil springs in a model 41
» Looking for springs
» Choosing correct recoil spring weight
» Wolff 1911 Variable power or standard recoil spring
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|