Bullseye-L Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Optimum velo for Zero/Nosler jkt 185?

+3
spursnguns
zanemoseley
bruce martindale
7 posters

Go down

Optimum velo for Zero/Nosler jkt 185? Empty Optimum velo for Zero/Nosler jkt 185?

Post by bruce martindale 5/14/2019, 3:06 pm

I see we need another ammo topic....l see all kinds of loads out there

5.1 WST gets me almost 900 fps,
4.2-700x around 730

4.6 be, l forget

Is there a sweet spot?

Also what about dies? Pull force from full crunch RCBS carbide sizers gets me 50 fps faster than a less sized shell from a Casull die but the latter look better and lak the wasp waist.

I may RR test some for fun
Thanks

bruce martindale

Posts : 1734
Join date : 2011-07-29
Location : Upstate NY

https://www.bullseyeforum.net/t20747-feeling-center-a-10-bullsey

Back to top Go down

Optimum velo for Zero/Nosler jkt 185? Empty Re: Optimum velo for Zero/Nosler jkt 185?

Post by zanemoseley 5/14/2019, 3:12 pm

Atlanta Arms lists 920 fps on their 185 JHP AMU load. I'm not sure if they use Nosler or Zero bullets but I would imagine they react similarly to the same FPS.

zanemoseley

Posts : 2688
Join date : 2015-07-11
Location : Cookeville, TN

Back to top Go down

Optimum velo for Zero/Nosler jkt 185? Empty Re: Optimum velo for Zero/Nosler jkt 185?

Post by spursnguns 5/14/2019, 3:54 pm

Hello bruce martindale,

Anything even close to 900 feet per second is way too fast (snappy recoil).  For the best accuracy, I would aim for 780 feet per second.  Achievable with....

   4.5 grains of Bullseye
   4.2 grains of CLAYS
   4.2 grains of Vihta Vuori N310

Does the sizing die really make any type of difference?  I would think that the diameter of your expander/funnel and the amount of crimp are the controlling variables.

Jim
spursnguns
spursnguns

Posts : 611
Join date : 2013-01-04
Age : 66
Location : Nampa, Idaho

Back to top Go down

Optimum velo for Zero/Nosler jkt 185? Empty Re: Optimum velo for Zero/Nosler jkt 185?

Post by James Hensler 5/14/2019, 4:48 pm

Try 4.3 of Titegroup and enjoy the x ring
James Hensler
James Hensler

Posts : 1245
Join date : 2018-01-15
Age : 55
Location : Southwest Florida

Back to top Go down

Optimum velo for Zero/Nosler jkt 185? Empty Re: Optimum velo for Zero/Nosler jkt 185?

Post by james r chapman 5/14/2019, 6:11 pm

Bruce, the Federal Gold Medal Match 185 gr, a highly accurate cartridge, states 780 fps on the box.
I chrono'd the Zero factory ammo , 185 jhp, at 824 fps.
james r chapman
james r chapman
Admin

Posts : 6359
Join date : 2012-01-31
Age : 75
Location : HELL, Michigan

Back to top Go down

Optimum velo for Zero/Nosler jkt 185? Empty Re: Optimum velo for Zero/Nosler jkt 185?

Post by David R 5/15/2019, 6:49 am

I chrono'd the Federal 185 GM match and got AV 736.
I buy a box now and then to use as a benchmark.
I compare my reloads to the factory match.

David
David R
David R

Posts : 408
Join date : 2018-12-10
Age : 64
Location : Hamlin NY

Back to top Go down

Optimum velo for Zero/Nosler jkt 185? Empty Re: Optimum velo for Zero/Nosler jkt 185?

Post by BE Mike 5/16/2019, 9:10 am

The load that Dave Salyer gave me eons ago was 4.5 gr. of Alliant Bullseye. It produces 829 fps. out of my Clark accurized Heavy Slide with Kart barrel and bushing with UltraDot mounted on the slide. I have found that it groups very well with a variety of good accurized pistols. One of our club members upped it to 4.6 grains with excellent results from a new Rock River wad gun. All the results were obtained from a Ransom Rest at 50 yards. I also found that, when I was competing, the 4.5 gr. Bullseye/ Nosler shot very well for me out of the hand.
BE Mike
BE Mike

Posts : 2564
Join date : 2011-07-29
Location : Indiana

Back to top Go down

Optimum velo for Zero/Nosler jkt 185? Empty Re: Optimum velo for Zero/Nosler jkt 185?

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum