Wanting recommendations-scope rings

Hi guys, im wanting recommendations about low profile scope rings for ultra dot 25 1" for  grooved Kart Rib. Thanks!

Weaver makes a nice 1" horizontally split ring. Walmart carries it in the store. Less than $10
Jon

Jon Eulette wrote:Weaver makes a nice 1" horizontally split ring. Walmart carries it in the store. Less than $10
Jon

Thanks Jon!

Christian,
Did your Kart come with the grooved rib? Mine from about 1983 has straight side rib. I would love to have that done to make scope mounting easy. I don't want to drill holes if there is any way around that.
DP

Karts never had a factory optic shroud to my knowledge. Old school was removing the shroud and putting a weaver base directly on the barrel. Dworak made the shroud for the optic most likely.
Jon

djperry2 wrote:Christian,
Did your Kart come with the grooved rib? Mine from about 1983 has straight side rib. I would love to have that done to make scope mounting easy. I don't want to drill holes if there is any way around that.
DP

Hi, i found this 5" Kart unit the past year on Ebay,was accurized By Don Nygord. Dont know if was fred Kart or Nygord but Apparently the conversion was cut to convert in 5". The chamber accept geco,cci and aguila, apparently was modified in difference of my like new or never fired 6" KART and the Rib  was cutted for positive extraction. I like a lot The Karts!

Jon Eulette wrote:Karts never had a factory optic shroud to my knowledge. Old school was removing the shroud and putting a weaver base directly on the barrel. Dworak made the shroud for the optic most likely.
Jon

Very difficult to find a aluminum shroud for 6".

Thanks for the info guys. Looks like I will keep shooting open sights or look for a newer, Nelson or Marvel for a dot.
DP

Hello,

Is this a .22 conversion for a S&W 52 .38 WC ?

TY

Gustavo1957 wrote:Hello,

Is this a .22 conversion for a S&W 52 .38 WC ?

TY

No, 1911.