I Need Recommendations for Scope Rings

I want to mount my 30mm Ultradot closer to the gun. I'm currently using the rings that come with the Ultradot from the factory. Does anyone have a suggestion for rings that mount the optic lower than the stock rings would? Thanks ahead of time.

B-Square 30mm low. Around $10. Just be careful not to strip the threads over tightening.
Jon

I have had good luck with the Redfield rings.
https://www.ebay.com/itm/Redfield-30mm-Medium-Aluminum-Rings-Black-Matte/112577978664?epid=1300143389&hash=item1a362ba128:g:gn0AAOSwwrtZyeCF

Or Simmons

https://www.ebay.com/itm/Simmons-Aluminum-Rings-30mm-Medium-Black-Matte/142507185627?hash=item212e1715db:g:tz4AAOSw5ulZuoAA

Leupold PRW rings "low"

Jon Eulette wrote:B-Square 30mm low. Around $10. Just be careful not to strip the threads over tightening.
Jon

I use these on most of my guns and have had good luck with them.  I get them off Amazon Prime.  Don

Multiracer wrote:Leupold PRW rings "low"

I also have had good luck with these.  I use the same style but with quick release on my .22 so it can quickly be converted to iron sights.

Jason I recommend aluminum rings for lighter weight on 45 and in some cases steel rings on conversions.
Jon

Burris makes a quality piece too. Hard to find the low mounts.

I went with a set of Aimpoint 30mm through the Amazon site.  Around $30, but I trusted the Aimpoint name - and Amazon's return policy.  Working well for me using the Matchdot II.

OneRound wrote:I went with a set of Aimpoint 30mm through the Amazon site.  Around $30, but I trusted the Aimpoint name - and Amazon's return policy.  Working well for me using the Matchdot II.

Those look pretty much identical to the B-Square mounts that Jon recommended. Interesting. Thanks guys!

The Aimpoint 30mm rings are really nice rings.
Jon

I've already stripped 1 set of my Aimpoint 9000 rings, replaced with Warne 213 low steel rings on my Marvel conversion, very nice. I was in the practice of torquing all rings to 20 inch pounds, no bueno on the the cheaper aluminum stuff, especially the way my Aimpoint rings installed best it put the clamp block at a bit of an angle which I think lead to the stripping more easily.

I'm thinking of replacing the other Aimpoint rings on the 45's with aluminum rings with steel inserts where the bolt threads, would love all steel rings on my 45's but they already weigh 3.25 pounds.  Something like these.

TAC Vector Optics Tactical Mark 30mm Low Weaver Mount Ring Fit Night Force Leupold Scope Color Black https://www.amazon.com/dp/B00UYUQQPO/ref=cm_sw_r_cp_apa_dy9-zbA0ZCZX1