Racking assist for M41
+2
Aprilian
xman
6 posters
Page 1 of 1
Racking assist for M41
I am looking for a racking assist device for my model 41 I am having problems gripping the serrated edge and getting the round to load. Any ideas from the faithful followers of the forum?
xman- Posts : 497
Join date : 2015-01-11
Age : 69
Location : Tyler,TX
Re: Racking assist for M41
skate tape works great
Aprilian- Posts : 987
Join date : 2016-05-13
Location : Minnesota
-TT-- Posts : 624
Join date : 2016-10-18
Re: Racking assist for M41
You can reduce the racking effort by stoning a radius on the back of the bolt where it contacts the hammer. Doesn’t need to be a radical radius but needs to be smooth. After that, the skateboard tape is a good idea.
Kp321- Posts : 237
Join date : 2019-06-17
Re: Racking assist for M41
Look here :
https://www.rimfirecentral.com/forums/showthread.php?t=1195919
https://www.rimfirecentral.com/forums/showthread.php?t=1195919
Domino1- Posts : 81
Join date : 2019-04-05
Re: Racking assist for M41
Never dry fire it. Never drop the slide unless loaded. Transport with chamber flag in barrel. When it is time to clean then remove barrel first thing. You could go for years without having to rack the slide. Or having to rack it with hammer down.
LenV- Posts : 4770
Join date : 2014-01-24
Age : 74
Location : Oregon
Similar topics
» Racking device
» racking slide with ultradot?
» Racking Your Slide With Optic
» Grip Material for M41 racking cuts
» Working around issues when racking the slide on a High Standard
» racking slide with ultradot?
» Racking Your Slide With Optic
» Grip Material for M41 racking cuts
» Working around issues when racking the slide on a High Standard
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum