Cheap RO trigger improvement
2 posters
Page 1 of 1
Cheap RO trigger improvement
Someone may have already posted this?:
To improve the trigger on an RO, replace the very stout 30lb mainspring(hammer spring) with a reduced power one from Wolff. They list them for the SA ILS mainspring housings. - We got the lightest, the 24lb--buy the 3-pak & share w/ friends?--
The lb numbers might sound heavy-Trust Wolff. -- A touch of Neco-MolySlide on the sear/hammer hooks and I think you'll notice REAL improvement.-We did-lightened pull to nearly 3.5lb & no problem with ignition. Helps function with a 22Lr conversion too.-- -- Don't forget to use the little take-down pin when removing the housing. Russ OR
To improve the trigger on an RO, replace the very stout 30lb mainspring(hammer spring) with a reduced power one from Wolff. They list them for the SA ILS mainspring housings. - We got the lightest, the 24lb--buy the 3-pak & share w/ friends?--
The lb numbers might sound heavy-Trust Wolff. -- A touch of Neco-MolySlide on the sear/hammer hooks and I think you'll notice REAL improvement.-We did-lightened pull to nearly 3.5lb & no problem with ignition. Helps function with a 22Lr conversion too.-- -- Don't forget to use the little take-down pin when removing the housing. Russ OR
Russ OR- Posts : 265
Join date : 2011-06-10
Location : Oregon City, OR
Re: Cheap RO trigger improvement
ISMI springs are really nice. I have a 17lb one for use with my Marvel conversion, and 20lb ones for my .45s
Rob Kovach- Admin
- Posts : 2692
Join date : 2011-06-14
Age : 51
Location : Brooklyn, WI
Similar topics
» Ordered a Range Officer and now ...?
» Cheap accurate Trigger scale
» Trigger Pull gauge-cheap & accurate
» 50 foot shooting
» Dot improvement for progressives
» Cheap accurate Trigger scale
» Trigger Pull gauge-cheap & accurate
» 50 foot shooting
» Dot improvement for progressives
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|