Lyman M Die Plug for 38 WCHB
5 posters
Page 1 of 1
Lyman M Die Plug for 38 WCHB
Hi All,
Can you recommend a plug to buy for the Lyman M Die Expander for 38 special. I would like to load accurate 148 WCHB. Is there a preferred plug for this die for that bullet?
I just got the die and it did not come with a plug. It just looks like the shaft with a female tread in the end. No plug. Is that normal?
Best,
Joe
Can you recommend a plug to buy for the Lyman M Die Expander for 38 special. I would like to load accurate 148 WCHB. Is there a preferred plug for this die for that bullet?
I just got the die and it did not come with a plug. It just looks like the shaft with a female tread in the end. No plug. Is that normal?
Best,
Joe
lanjo- Posts : 103
Join date : 2015-02-22
Location : Richmond, VA
Re: Lyman M Die Plug for 38 WCHB
You bought the die new? It should have a two step expander plug with it.
http://ps-2.kev009.com/ohland/Cast_Bullet/Lyman_M-Dies/Lyman_M-Die_Plugs.html
http://ps-2.kev009.com/ohland/Cast_Bullet/Lyman_M-Dies/Lyman_M-Die_Plugs.html
TonyH- Posts : 802
Join date : 2018-08-06
Location : Utah's Dixie
Re: Lyman M Die Plug for 38 WCHB
Did not come with one. I think I need to return.
lanjo- Posts : 103
Join date : 2015-02-22
Location : Richmond, VA
Re: Lyman M Die Plug for 38 WCHB
Did you specify which expanding plug you wanted?
You may have only ordered the body.
You may have only ordered the body.
STEVE SAMELAK- Posts : 958
Join date : 2011-06-10
Re: Lyman M Die Plug for 38 WCHB
Would you guys suggest 0.360 expander if I am going to use a 0.358 bullet? I tested a few bullets of different shapes and diameters. The one with the greatest potential is the Zero 0.358 WCHB. So, I would want to load that.
Would a 0.360 expander be the best for that 0.358 diameter WCHB bullet?
Also, should I get the short or the long stem?
Would a 0.360 expander be the best for that 0.358 diameter WCHB bullet?
Also, should I get the short or the long stem?
lanjo- Posts : 103
Join date : 2015-02-22
Location : Richmond, VA
Re: Lyman M Die Plug for 38 WCHB
I would first try a .360" expander, and one that would expand to about to the depth the HBWC will extend down to where the base of the bullet will go.
NuJudge- Posts : 263
Join date : 2011-09-22
Age : 67
Location : SE Michigan
Similar topics
» Mold for the Remington 0.360" 148 GR WCHB 38 specal bullet
» Die seater plug....
» Lyman 452389
» Using a Lyman "M" Die in a Dillon 650
» 32 S&W Long Wadcutter Plug
» Die seater plug....
» Lyman 452389
» Using a Lyman "M" Die in a Dillon 650
» 32 S&W Long Wadcutter Plug
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum