H208 extractor vs Xesse…same?

So my 208 extractor blew out last week and I can’t find it at the range. 

Oddly enough with oiling, the gun still runs but I do get some jams

Red Feather doesn’t have any in stock, is there an equivalent in the Trailside or  Exesse?


Thoughts or recommendations?

Thanks

I have a new one I can send you as long as you return one when you find one. I assume you need a spring also? 

Bill

Looks like you need a 1 201 270, but the (older) Hämmerli-branded Xesse part is 1 232 030 or 1 232 040, so I doubt it will fit easily. I don't have a Sig Trailside parts diagram, sorry.

The part # on mine is 1202021

Bill

Oops! 1 202 021 is correct. Here's a photo of the Xesse 1 232 040 extractor, to compare. The Walther part number for it is 274 29 46.

messenger wrote:I have a new one I can send you as long as you return one when you find one. I assume you need a spring also? 

Bill

Thank you for your kindness. I found my only spare extractor and a good friend picked up pins and springs at Cardinal. I’ll put it together at Perry but will bring my spare gun too.

You guys are super!

Check with Jon Shue, He is making them.
Neil

I think you'll find the 208 and 208s do not share the same extractor.

The 208 has a shorter, wider extractor acted on by a spring and pusher:


While the 208s has a longer, slimmer piece that is acted on directly by a spring on the tail:

Interesting! So my 215 is more like the 208s.

Also, these folks have some Hammerli parts if you're ok with bank transfers for payment-

https://schiesssport-billharz.eu/

messenger wrote:The part # on mine is 1202021

Bill

Is that part #1202021 extractor from the 208s, i.e., the longer extractor?  I see that the German company provided in
the link has that part for 73.36 Euros.

Mike

mbmshooter wrote:

messenger wrote:The part # on mine is 1202021

Bill

Is that part #1202021 extractor from the 208s, i.e., the longer extractor?  I see that the German company provided in
the link has that part for 73.36 Euros.

Mike

Yes it is. I don't recall how much I paid for it. I bought it from red feather.

Bill

Importing gun parts, no matter how insignificant, can be significant….l once had some pellets in my carry on. They were not allowed but going fishing snd using them for sinkers was