Clays back on line.
2 posters
Page 1 of 1
Clays back on line.
"ADI Powders return to full production
13 January 2015
For those of you affected by the disruption in manufacture of flake powders, it will no doubt come as welcome news that ADI is once again in full production of AS30N, AP50N, AS50N, AP70N and AP100.
It may take a while for us and our distributor to get AP70N to every corner of Australia, so we ask that you continue to be patient if your gunshop does not immediately receive supply. Please be assured that we are producing large volumes of powder, and that any difficulty you may have getting hold of any of our powers at the moment is most likely due to the challenges associated with physically moving powder around Australia.
Thank you for your loyalty to our proudly Australian made products during this period."
Thats Hodgdon Powders in the US market..Clays is AS30, International is AS50 and Universal is AP70.
This should help availability of other powders too!
- Dave
dronning- Posts : 2581
Join date : 2013-03-20
Age : 70
Location : Lakeville, MN
Re: Clays back on line.
beatendeadhorse wrote:That's great to hear about Clays, I use it mostly in shotshells.
Was/is my goto bullseye load, mainly because it's not temp sensitive so I can shoot the same loads from 40 to 90 degrees.
3.6gr for 185gr SWC.
4.0-4.2gr for 185gr JHP.
- Dave
dronning- Posts : 2581
Join date : 2013-03-20
Age : 70
Location : Lakeville, MN
Re: Clays back on line.
Was able to get 2 lbs of Universal this weekend for Handgun Silhouette use. Very happy over that.
jmdavis- Posts : 1409
Join date : 2012-03-23
Location : Virginia
Similar topics
» using Clays for 45 ACP
» Clays for Bullseye
» Using "Clays" powder for .45 Auto Loads
» 185 gr jhp loads with clays
» Clays and metering
» Clays for Bullseye
» Using "Clays" powder for .45 Auto Loads
» 185 gr jhp loads with clays
» Clays and metering
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|