Bullseye-L Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Brazos 160 SWC Question

+2
jglenn21
Jon Eulette
6 posters

Go down

Brazos 160 SWC Question Empty Brazos 160 SWC Question

Post by James Hensler Tue Jan 07, 2020 9:30 am

Brazos 160 SWC Question 5c147310

Guys I normally seat my 185 Zero’s at 1.210 and I rarely if never had a failure to feed issue with my Wadgun. I told Steve I would try his 160’s and just received 2 bags so around 1300 projectiles. When I adjusted my seating due to achieve 1.210 there is to me a lot of shoulder sticking out! What do you guys think?
James Hensler
James Hensler

Posts : 1245
Join date : 2018-01-15
Age : 55
Location : Southwest Florida

Back to top Go down

Brazos 160 SWC Question Empty Re: Brazos 160 SWC Question

Post by Jon Eulette Tue Jan 07, 2020 9:37 am

0.920 from bottom of case to shoulder.
Jon
Jon Eulette
Jon Eulette

Posts : 4399
Join date : 2013-04-15
Location : Southern Kalifornia

Back to top Go down

Brazos 160 SWC Question Empty Re: Brazos 160 SWC Question

Post by James Hensler Tue Jan 07, 2020 9:52 am

Jon that pic is .930

Forgot to send the pic!!! Lol


Last edited by James Hensler on Tue Jan 07, 2020 10:36 am; edited 1 time in total
James Hensler
James Hensler

Posts : 1245
Join date : 2018-01-15
Age : 55
Location : Southwest Florida

Back to top Go down

Brazos 160 SWC Question Empty Re: Brazos 160 SWC Question

Post by jglenn21 Tue Jan 07, 2020 9:56 am

Jon's right. I seat.the 160 just.like my 200 or.180s. Off the shoulder of the swc.  I've had zero issues making my wad guns feed these little pills
jglenn21
jglenn21

Posts : 2618
Join date : 2015-04-07
Age : 76
Location : monroe , ga

Back to top Go down

Brazos 160 SWC Question Empty Re: Brazos 160 SWC Question

Post by zanemoseley Tue Jan 07, 2020 10:03 am

James Hensler wrote:Jon that pic is .930

You're measuring something wrong. The SAAMI spec for the OAL of a 45acp case is .898" which means you should only have .022" exposed if you use the .920" length from base to shoulder. Your picture appears to have the shoulder exposed by almost 1/8". I also have no feeding issues using the .920" dimension with a pistol Jon built.

zanemoseley

Posts : 2687
Join date : 2015-07-11
Location : Cookeville, TN

Back to top Go down

Brazos 160 SWC Question Empty Re: Brazos 160 SWC Question

Post by TonyH Tue Jan 07, 2020 10:11 am

zanemoseley wrote:
James Hensler wrote:Jon that pic is .930

You're measuring something wrong. The SAAMI spec for the OAL of a 45acp case is .898" which means you should only have .022" exposed if you use the .920" length from base to shoulder. Your picture appears to have the shoulder exposed by almost 1/8". I also have no feeding issues using the .920" dimension with a pistol Jon built.
+1 minus the pistol that Jon built..... Very Happy
TonyH
TonyH

Posts : 801
Join date : 2018-08-06
Location : Utah's Dixie

Back to top Go down

Brazos 160 SWC Question Empty Re: Brazos 160 SWC Question

Post by James Hensler Tue Jan 07, 2020 10:35 am

Brazos 160 SWC Question 11489510
Brazos 160 SWC Question 54456910

So this little thing won’t take a nose dive?
James Hensler
James Hensler

Posts : 1245
Join date : 2018-01-15
Age : 55
Location : Southwest Florida

Back to top Go down

Brazos 160 SWC Question Empty Re: Brazos 160 SWC Question

Post by zanemoseley Tue Jan 07, 2020 10:38 am

Looks perfect! If your gun won't feed them its not the ammo.

zanemoseley

Posts : 2687
Join date : 2015-07-11
Location : Cookeville, TN

Back to top Go down

Brazos 160 SWC Question Empty Re: Brazos 160 SWC Question

Post by James Hensler Tue Jan 07, 2020 10:43 am

Ok thanks guys! 

Now the painful wait to get it back from Doug and the Accurails
James Hensler
James Hensler

Posts : 1245
Join date : 2018-01-15
Age : 55
Location : Southwest Florida

Back to top Go down

Brazos 160 SWC Question Empty Re: Brazos 160 SWC Question

Post by james r chapman Tue Jan 07, 2020 10:48 am

THAT should be a winner!
Definitely not the first
Pic!
james r chapman
james r chapman
Admin

Posts : 6357
Join date : 2012-01-31
Age : 75
Location : HELL, Michigan

Back to top Go down

Brazos 160 SWC Question Empty Re: Brazos 160 SWC Question

Post by TonyH Tue Jan 07, 2020 2:32 pm

James Hensler wrote:Ok thanks guys! 

Now the painful wait to get it back from Doug and the Accurails
Get about 200 commercial or full power loads ready to break the Acc-U-Rails in.......
TonyH
TonyH

Posts : 801
Join date : 2018-08-06
Location : Utah's Dixie

Back to top Go down

Brazos 160 SWC Question Empty Re: Brazos 160 SWC Question

Post by James Hensler Tue Jan 07, 2020 3:19 pm

Oh shit really??
James Hensler
James Hensler

Posts : 1245
Join date : 2018-01-15
Age : 55
Location : Southwest Florida

Back to top Go down

Brazos 160 SWC Question Empty Re: Brazos 160 SWC Question

Post by Jon Eulette Tue Jan 07, 2020 3:37 pm

Accu-Rails are tight bastards when you get the pistol back. Oil the hell out of them and keep them very clean (especially the underside against the frame) and well lubed.
I've been working on a 38 special with the rails and it has taken a lot of extra work to get that darn thing to cycle.
Jon
Jon Eulette
Jon Eulette

Posts : 4399
Join date : 2013-04-15
Location : Southern Kalifornia

Back to top Go down

Brazos 160 SWC Question Empty Re: Brazos 160 SWC Question

Post by james r chapman Tue Jan 07, 2020 3:58 pm

What 230 factories were made for!
Smile
james r chapman
james r chapman
Admin

Posts : 6357
Join date : 2012-01-31
Age : 75
Location : HELL, Michigan

Back to top Go down

Brazos 160 SWC Question Empty Re: Brazos 160 SWC Question

Post by James Hensler Tue Jan 07, 2020 4:55 pm

Well I have to get it right by April 5th for Dixie
James Hensler
James Hensler

Posts : 1245
Join date : 2018-01-15
Age : 55
Location : Southwest Florida

Back to top Go down

Brazos 160 SWC Question Empty Re: Brazos 160 SWC Question

Post by TonyH Tue Jan 07, 2020 7:18 pm

+1 on what Jon says above, but you will love the way the gun shoots...the tight clover leafs will put a smile on your face......
TonyH
TonyH

Posts : 801
Join date : 2018-08-06
Location : Utah's Dixie

Back to top Go down

Brazos 160 SWC Question Empty Re: Brazos 160 SWC Question

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum