Bullseye-L Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Loading Coated Bullets In 45 ACP

+2
Wobbley
ctrshot
6 posters

Go down

Loading Coated Bullets In 45 ACP Empty Loading Coated Bullets In 45 ACP

Post by ctrshot 12/5/2023, 6:30 pm

Has anyone else had to increase powder charge to ensure the slide locks backafter last shot when using coated bullets? I've had to increase powder charge from 4.0 Bullseye to 4.2 Bullseye when shooting SNS coated 200 grain 45 ACP bullet with lube grove crimped at .467. OAL is 1.238" 12 lb spring, Dot is Aimpoint 9000 mounted on the slide. I had no issue shooting another manufacturer's 200 grain bullet but switched makers due to barrel leading.

ctrshot

Posts : 3
Join date : 2013-03-03

Back to top Go down

Loading Coated Bullets In 45 ACP Empty Re: Loading Coated Bullets In 45 ACP

Post by Wobbley 12/5/2023, 7:10 pm

Not for me.  Mine functions fine at 3.8 Bullseye.
Wobbley
Wobbley
Admin

Posts : 4808
Join date : 2015-02-12

x90rider likes this post

Back to top Go down

Loading Coated Bullets In 45 ACP Empty Re: Loading Coated Bullets In 45 ACP

Post by chiz1180 12/5/2023, 7:49 pm

You can try tightening up your crimp a bit with your original charge.
chiz1180
chiz1180

Posts : 1510
Join date : 2019-05-29
Location : Ohio

Back to top Go down

Loading Coated Bullets In 45 ACP Empty Re: Loading Coated Bullets In 45 ACP

Post by Multiracer 12/5/2023, 8:07 pm

Reduce the spring to ten and then try a nine.

Multiracer

Posts : 1002
Join date : 2017-03-15
Location : North Ohio

Back to top Go down

Loading Coated Bullets In 45 ACP Empty Re: Loading Coated Bullets In 45 ACP

Post by BE Mike 12/6/2023, 8:37 am

Find the most accurate reasonable load, verified at 50 yards and adjust the gun to accommodate it, by changing recoil spring weights, etc.
BE Mike
BE Mike

Posts : 2589
Join date : 2011-07-29
Location : Indiana

spursnguns likes this post

Back to top Go down

Loading Coated Bullets In 45 ACP Empty Re: Loading Coated Bullets In 45 ACP

Post by troystaten 12/11/2023, 12:23 am

For my slide mounted 1911 I shoot a 185 grain Bayou Bullet (those are coated with a Hi-tek coating) and 3.8 grains of Bullseye and .464-.465 crimp.  The gun has a 9 pound spring. Locks back after the last shot everytime

troystaten

Posts : 824
Join date : 2012-04-18

Back to top Go down

Loading Coated Bullets In 45 ACP Empty Re: Loading Coated Bullets In 45 ACP

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum