BE load for 185gr swaged hp
+2
dan allen
Jerry Goldfarb
6 posters
Page 1 of 1
BE load for 185gr swaged hp
I just ordered a test order of 500 45 ACP-185-SWCHP-SWAGED LEAD-N0 814 from Magnus. I was wondering what the best BE powder load would be for using at both 25yd and 50yd distances?
Jerry Goldfarb- Posts : 81
Join date : 2011-06-10
Age : 86
Location : South Florida
Re: BE load for 185gr swaged hp
I would start with 4 grains of Bullseye. There are others powders that will likely work as well but I have no experience with them in a .45 load. Keep us posted.
dan allen- Posts : 118
Join date : 2011-06-19
Location : Distinguished - 2600 Club
Re: BE load for 185gr swaged hp
I've run anywhere from 3.9 - 4.2 gr. of bullseye with that exact bullet.
Steve B- Posts : 626
Join date : 2011-06-16
Location : Elkhart, IN
Re: BE load for 185gr swaged hp
On softer swaged 185 bullets, 3.9-4.0 is the sweet load, ive ransomed these many times and from a kart barrel it shoots less than 2'' in most guns, oal, 1.215 crimp to .469,
DavidR- Admin
- Posts : 3032
Join date : 2011-06-10
Age : 70
Location : NRA:Expert, Georgia
Re: BE load for 185gr swaged hp
I love the Zero 185 SWCHP and load 3.8 Clays for sustained fire 25 yards. Soft and accurate. I drop to 3.4 for indoor 50'
Re: BE load for 185gr swaged hp
Joe Fobes wrote:I love the Zero 185 SWCHP and load 3.8 Clays for sustained fire 25 yards. Soft and accurate. I drop to 3.4 for indoor 50'
I use the same load. Clays or Clay Dot. Much cleaner than Bullseye.
rob5r- Posts : 50
Join date : 2012-01-13
Location : Newport News, VA
Similar topics
» WST 185gr load data
» BE load for 200gr swaged bullet
» I am seeking a good load for 185gr Zero SWCHP.
» Developing Lead 185gr/200gr Load Pairing
» How do I keep my swaged bullets from getting swaged during reloading?
» BE load for 200gr swaged bullet
» I am seeking a good load for 185gr Zero SWCHP.
» Developing Lead 185gr/200gr Load Pairing
» How do I keep my swaged bullets from getting swaged during reloading?
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|