Benelli MP95E Ransom fixture
3 posters
Page 1 of 1
Benelli MP95E Ransom fixture
Anyone fabricate an insert/fixture for the MP95E (32sw lwc) for the Ransom Rest? Before I reinvent the wheel, thought I'd check to see if it's already done. I have a mill, so any machining is not an issue.
Craig
Craig
cddawson- Posts : 5
Join date : 2021-09-15
Location : florida
Re: Benelli MP95E Ransom fixture
Contact Andrew Berryhill, he can 3d print custom inserts: https://www.precisiontargetpistolgrips.com/store/p37/Ransom_Rest_Insert.html
Re: Benelli MP95E Ransom fixture
The MP95 grip is fastened directly to the receiver, so when you remove the grip you don't have any frame to put into an insert pretty sure that's why Ransome doesn't make one. I'll check with your guy to see what he's got.
Thanks for your help,
Craig
Thanks for your help,
Craig
cddawson- Posts : 5
Join date : 2021-09-15
Location : florida
james r chapman- Admin
- Posts : 6359
Join date : 2012-01-31
Age : 75
Location : HELL, Michigan
james r chapman- Admin
- Posts : 6359
Join date : 2012-01-31
Age : 75
Location : HELL, Michigan
Re: Benelli MP95E Ransom fixture
Thanks, that's what I was thinking had to be done too but was thinking aluminum. I can fabricate one pretty easily. Keep forgetting I'm Fusion savvy, have a 3D printer, and time (retired)...
Thanks again for the help,
Craig
Thanks again for the help,
Craig
cddawson- Posts : 5
Join date : 2021-09-15
Location : florida
james r chapman and troystaten like this post
Similar topics
» benelli MP95e
» Benelli MP95e
» New to me Benelli mp95e
» Benelli mp95e firing pin
» Need 30mm Ultra Dot mount for Benelli MP95E
» Benelli MP95e
» New to me Benelli mp95e
» Benelli mp95e firing pin
» Need 30mm Ultra Dot mount for Benelli MP95E
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|